Table of Contents
Advertisement
Upholstered seat installation
•
Assemble the upholstered seat (A04) to the guide rail (A05) using two PVC pads (C10) and
two screws M4 (B14).
•
Tighten nuts with the hex tool with Phillips screwdriver that provided.
Upright post installation
•
Lift the upright post (A06) and connect matching connectors then extra slide extra length
cables into the opening of the main frame (A01). Make sure that all cables are not pressed by
the upright post while during assembling. Lock the knob by turning it clockwise. Then slide
extra length cables into the opening of the main frame (A01).
•
Assemble the upright post (A06) with two bolts M8 (B27), two washers (B13).
•
Tighten the screws with the M5 Allen key that provided.
•
WARNING: Cables cannot be folded.
8
Advertisement
Table of Contents
