Part No.
Picture
49
51
53
36
59
62
ASSEMBLY STEPS
STEP 1
Put the main frame assembly onto the floor as shown in picture. Refer to the A drawing. Make sure the
key rib in the stabilizer cap (5) aligns with the slot in the rear support (4). Then press the stabilizer cap
(5) onto the rear support (4). Turn the main frame assembly to the normal upright position and make
sure the stabilizer pad (6) is secured to the stabilizer cap (5).
Description
Round-head screw (M5x0.8x12 mm)
Button-head bolt (M8x1.25x15 mm)
Button-head bolt (M8x1.25x25 mm)
Large washer (M8)
Washer (M8)
Nylon nut (M8x1.25)
6
Qty.
2
8
2
2
8
2