Table of Contents
Advertisement
ASSEMBLY
STEP 1
1. Attach the left and right foot covers (38L, 38R) to the main frame (1) with screws (86).
2. Affix the front stabilizer (3) to the main frame (1) as shown in fig. a. Use Allen bolts (20), spring
washers (21) and flat washers (22) as shown in fig. b.
STEP 2
1. Attach the sliding beam (8) to the main frame (1) with Allen bolts (20), spring washers (21) and
flat washers (22).
2. Affix the rear stabilizer (4) to the sliding beam (8) with Allen bolts (20), spring washers (21)
and flat washers (22), as shown in fig. a.
5
Advertisement
Table of Contents
