Table of Contents
Advertisement
Different exercise models handle installation
•
Please secure the hook of the handlebar of different rowing exercise models to the clip hook of
the rowing tension strap (Fig. 01-03).
•
Assemble the C03 part to the front curve plate of the paddle-kayaking exercise handle (A11)
with two screws M5 (B29).
•
Tighten nuts with hex tool with Phillips screwdriver that provided.
FOLDING
•
Two people are required for folding.
•
Remove B23 from the front of A01 (Fig. 01).
•
Slide the seat assembly to the front. Then fold over the guide rail (A05). Secure the guide rail
with folded position with locking the knob while turning it clockwise. Secure the guide rail with
tightening the lock knob.
•
Remove the lock knob (B22) of securing the rear foot stabilizer (A03). Rotate the rear
stabilizer to the folded position. Secure the rear stabilizer with tightening the lock knob.
Fig. 01
10
Advertisement
Table of Contents
