Capturing Screenshot Using The Remote Control; Using The Remote Control; Using Mouse & Keyboard - Grandstream Networks GVC3202 User Manual

CAPTURING SCREENSHOT USING THE REMOTE CONTROL

To capture a screenshot on GVC3202, the users can press the red shortcut key
key at the same time for about 3 seconds. The screenshot picture will be saved in the internal
storage of GVC3202. The users can access the screenshot in GVC3202 LCD menu->Applications->File
Manager->Internal Storage->Pictures->Screenshot.
Please note the screenshot captured here doesn't have the image captured from the camera in the
background. If you would like the image captured from camera, you can press the CAMERA button on the
remote control and then press the blue shortcut key.

USING THE REMOTE CONTROL

GVC3202 remote control is connected to GVC3202 via Bluetooth, and it's already pre-paired when the
user receives GVC3202 packages. Before using the remote control, please make sure:
1. A pair of AAA batteries are correctly installed on the back of the remote control.
2. The remote control needs to be placed within the Bluetooth effective range, i.e., 10m from GVC3202.
After powering up GVC3202, pressing "OK" key on the remote control, it will initiate connection and the
remote control can be used right away.
If the remote control fails to pair and connect to GVC3202, please follow the steps below to troubleshoot:

Check the battery polarity when placed into the battery case. Make sure the batteries are placed in
the correct direction in the remote control.

Check the battery power.
If GVC3202 remote control still does not work with the diagnosis above, please try another remote control
or contact the device provider.
USING MOUSE & KEYBOARD
When the USB mouse is plugged into GVC3202, users could make the following operations with the
mouse.

Single click the left key of the USB mouse to perform the following operations:
 Access menu
Firmware Version 1.0.0.X GVC3202 User Guide
and blue shortcut
Page 27 of 117