Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 84

4
NTP debug commands
NTP: ntp_clock_filter: mitigated sample stats: n 1 offset 0.01133625 del
0.27379156 dsp 7.93750968 jit 0.00001525
NTP: ntp_peer_unfit: dist exceeded - root dist 8.07442072 of peer 10.25.96.13 has
exceeded max dist 1.50096000
NTP: ntp_clock_select: number of final survivors 0 and leap vote 0
NTP: ntp_clock_select: No survivors found. sys_peer is set to NULL
NTP: ntp_clock_filter: Adding offset 0.02724471, delay 0.30800050, disp
0.00001988 to filter[2] for peer 10.25.96.13
NTP: ntp_clock_filter: mitigated sample stats: n 2 offset 0.02724471 del
0.30800050 dsp 3.93752228 jit 0.00001525
NTP: ntp_peer_unfit: dist exceeded - root dist 4.09153779 of peer 10.25.96.13 has
exceeded max dist 1.50096000
NTP: ntp_clock_update: at 430 sample 430 associd 2
NTP: ntp_rstclock: mu 67 new state 5 old state 5 offset -0.00001326
debug ip ntp association
Syntax: [no] debug ip ntp association
This command displays information about the NTP server and peer association. Command output
resembles the following example.
Brocade# debug ip ntp association
NTP: peer_clear: peer 10.25.96.13 next 646 refid INIT
NTP: newpeer: 10.25.96.13 mode client vers 4 poll 6 10 key 00000000
Flags Flags -> iBURST
SYSLOG: <14>Mar 21 17:44:33 Murali NTP: client association is mobilized for
10.25.96.13.
SYSLOG: <14>Mar 21 17:44:33 Murali NTP: The system clock is not synchronized to
any time source.
SYSLOG: <14>Mar 21 17:44:40 Murali NTP: Stratum is changed to 2.
SYSLOG: <14>Mar 21 17:44:40 Murali NTP: System clock is synchronized to
10.25.96.13.
debug ip ntp broadcast
Syntax: [no] debug ip ntp broadcast
This command displays information about the NTP broadcast server and client. Command output
resembles the following example.
Brocade# debug ip ntp broadcast
Oct 19 18:32:46 NTP: ntp_timer: interface mgmt1 is up, we may send broadcast
packet
Oct 19 18:32:49 NTP: Sending NTP broadcast packet to subnet 10.20.111.255 via port
mgmt1
Oct 19 18:33:56 NTP: Sending NTP broadcast packet to subnet 10.20.111.255 via port
mgmt1
debug ip ntp clockadjust
Syntax: [no] debug ip ntp clockadjust
This command displays information about the NTP clock-adjust process. Command output
resembles the following example.
Brocade# debug ip ntp clockadjust
NTP: ntp_clock_update: at 327 sample 327 associd 3
72 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01