Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 41

Brocade# rstp_txRSTP(T=25704)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25704)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
Brocade# rstputil_mct_handle_incoming_BPDU(T=25705, VLAN=20,port=1/7)
port-stp-state=FORWARDING
no CLUSTER CCP_FSM(T=25713): Fsm12 10.1.1.2 sending keepalive
CLUSTER CCP PEER(T=25713): Make keep alive message ->
CCP_PKT(T=25713): Sending Keep Alive message to peer
CCP_PKT(T=25713): Packet Info:0100000c000000080003000400000057
debug crstp_txRSTP(T=25724)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25724)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
lurstputil_mct_handle_incoming_BPDU(T=25725, VLAN=20,port=1/7)
port-stp-state=FORWARDING
If the debug cluster all command is disabled, the output similar to the following is displayed.
Brocade# no debug cluster all
MCT:: disabling all debugs
CLUSTER ALL debugging is now OFF
debug cluster ccp
Syntax: [no] debug cluster ccp [fsm | tcp | packets | itc | client | events | memory]
•
•
•
•
•
•
•
This command enables debugging of all CCP FSM messages, CCP client registrations, CCP packet
exchanges from clients, Keepalive messages and notifications, data buffer usage, and specific
peer-related message exchanges. Command output resembles the following example.
Brocade# debug cluster ccp
CLUSTER CCP debugging is on for all
============= Packet Receive =======================
SX_4#CCP_PKT(T=104981): Receiving Packet from peer 10.10.10.2
CCP_PKT(T=104981): Packet
Info:0100001c000400180009001400010065012c0300000000008000002438
CCP_PKT(T=104981): Receiving Packet from peer 10.10.10.2, appId=4
(CCP_APPLICATION_CCP=0;CCP_APPLICATION_CLUSTER_MGR=1)
CCP_PKT(T=104981): Packet
Info:0100001c000400180009001400010065012c0300000000008000002438
CCP_PKT(T=104981): Passing packet to app 4 (cluster=1,mac=2,stp=4)
CCP_PKT(T=104981): Packet
Info:000400180009001400010065012c0300000000008000002438221b1a
================= Packet passed to specific client ======================
ccp_pass_pkt_to_client()(T=104981): cluster id 1, peer ip=168430082, STP msg
CLUSTER CCP: free data buf
CLUSTER CCP:internal free data buf
CLUSTER CCP:internal alloc data buf
CLUSTER CCP:alloc data buf
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
fsm - Enables CCP FSM debugging for a given peer IP or all peers.
tcp - Enables CCP TCP debugging for a given peer IP or all peers.
packets - Enables CCP packet debugging for a given peer IP or all peers.
itc - Enables CCP ITC debugging .
client - Enables CCP client related registration debugging.
events - Enables CCP events debugging.
memory - Enables CCP memory debugging.
allocated packet count
allocated packet count
allocated packet count
allocated packet count
MCT debug commands
1 buffer 21a215e8
0 bufer 21a215e8
1 buffer 21a215e8
1 buffer 21a215e8
3
29