Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 168

6
PIM debug commands
Mcastv4 receive event 15
Mcastv4 receive event 15
Mcastv4 receive event 15
debug ip pim group
Syntax: [no] debug ip pim group ipaddr
This command displays the PIM related activities related to the particular IP address of the PIM
group.
Brocade# debug ip pim group 227.1.1.1
Brocade# Proc IGMP join g=227.1.1.1 from v300(2/1/17) 10.11.55.55
PIM: send prune v100, source 10.11.99.99 group 227.1.1.1 nbr 10.10.10.129
Begin sending Join/Prune msg to v100, rpf_nbr=10.10.10.129,
group address: 227.1.1.1
Prune list: (10.11.99.99 227.1.1.1) wc=0 rpt=0 sparse=1
send_J/P_msg(), lcl_adr=10.10.10.119 dest=224.0.0.13 pkt_size=34 to v100
PIM: send prune v100, source 0.0.0.0 group 227.1.1.1 nbr 10.10.10.129
Begin sending Join/Prune msg to v100, rpf_nbr=10.10.10.129,
group address: 227.1.1.1
Prune list: (0.0.0.0 227.1.1.1) wc=0 rpt=0 sparse=1
Prune list: (10.11.99.99 227.1.1.1) wc=0 rpt=0 sparse=1
send_J/P_msg(), lcl_adr=10.10.10.119 dest=224.0.0.13 pkt_size=42 to v100
Begin sending Join/Prune msg to v100, rpf_nbr=10.10.10.129,
group address: 227.1.1.1
Prune list: (10.10.10.129 227.1.1.1) wc=1 rpt=1 sparse=1
send_J/P_msg(), lcl_adr=10.10.10.119 dest=224.0.0.13 pkt_size=34 to v100
join_prune_timer, (10.11.99.99 227.1.1.1) num=0, RPT=0, group_on_dr_and_sg=0, PR
UNE
join_prune_timer, (10.11.99.99 227.1.1.1) ->num=0, rpt=0, spt=1, SRC=v100, RP=v1
00
join_prune_timer, (10.11.99.99 227.1.1.1) fail RPT PRUNE cond.
join_prune_timer, (0.0.0.0 227.1.1.1) rp not local, send join or prune, wc=1, rp
t=1
Begin sending Join/Prune msg to v100, rpf_nbr=10.10.10.129,
group address: 227.1.1.1
Prune list: (10.10.10.129 227.1.1.1) wc=1 rpt=1 sparse=1
Prune list: (10.11.99.99 227.1.1.1) wc=0 rpt=0 sparse=1
send_J/P_msg(), lcl_adr=10.10.10.119 dest=224.0.0.13 pkt_size=406 to v100
Brocade# show ip pim group | i 227.1.1.1
Brocade# join_prune_timer, (10.11.99.99 227.1.1.1) num=0, RPT=0, group_on_
dr_and_sg=0, PRUNE
join_prune_timer, (10.11.99.99 227.1.1.1) ->num=0, rpt=0, spt=1, SRC=v100, RP=v1
00
join_prune_timer, (10.11.99.99 227.1.1.1) fail RPT PRUNE cond.
join_prune_timer, (0.0.0.0 227.1.1.1) rp not local, send join or prune, wc=1, rp
t=1
Begin sending Join/Prune msg to v100, rpf_nbr=10.10.10.129,
group address: 227.1.1.1
Prune list: (10.10.10.129 227.1.1.1) wc=1 rpt=1 sparse=1
Prune list: (10.11.99.99 227.1.1.1) wc=0 rpt=0 sparse=1
send_J/P_msg(), lcl_adr=10.10.10.119 dest=224.0.0.13 pkt_size=406 to v100
Brocade# Proc IGMP join g=227.1.1.1 from v300(2/1/17) 10.11.55.55
156 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01