Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 60

Fastiron x series; fcx series; icx series; turboiron series;
Hide thumbs Also See for FastIron SX 800:
Table of Contents

Advertisement

3
debug pp-trunk-hash
debug pp-trunk-hash
Traces and displays the output port through which a given packet can be sent out in a trunk.
Syntax
debug pp-trunk-hash [trunk_port | ingress_port]
debug pp-trunk-hash trunk_port
debug pp-trunk-hash ingress_ port
no debug pp-trunk-hash
Parameters
trunk_port
ingress_ port
unicast-distribution Generates debugging information related to unicast distribution.
sw_ trunk_ ID
v4-device
48
unicast-distribution ip dmac smac [dst_ipv4 src_ipv4 dst_tcp/udp_port src_tcp/udp_port |
dst_ipv6 src_ipv6 dst_tcp/udp_port src_tcp/udp_port]
unicast-distribution non-ip dmac smac
v4-device sw_ trunk_ ID [registered-multicast vlan vidx | routed-flow dst_ipv4 src_ipv4
IPHdr_Protocol | switched-flow ip dst_ipv4 src_ipv4 | switched-flow non-ip dmac smac |
unregistered-multicast vlan]
v6-device sw_trunk_ID [routed-multicast-distribution vlan | unicast-distribution [ip dmac smac
[dst_ipv4 src_ipv4 [dst_tcp | udp_port] [src_tcp | udp_port] | dst_ipv6 src_ipv6 [dst_tcp |
udp_port] [src_tcp | udp_port]]| non-ip dmac smac]]
Specifies the trunk member port number.
Specifies the ingress port number.
ip dmac smac
Generates debugging information related to unicast IPv4 and IPv6
distribution for the specified destination MAC address and source MAC
address. The following variables are supported with this option.
dst_ipv4
Specifies the destination IPv4 address.
src_ipv4
Specifies the source IPv4 address.
dst_tcp | udp_port
Specifies the destination TCP or UDP port number.
src_tcp | udp_port
Specifies the source TCP or UDP port number.
dst_ipv6
Specifies the destination IPv6 address.
src_ipv6
Specifies the source IPv6 address.
non-ip dmac smac
Generates debugging information related to unicast non-IP distribution for the
specified destination MAC address and source MAC address.
Specifies the software trunk ID.
Generates debugging information related to the IPv4 device. The following
parameters are supported with this option.
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents