Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 58

3
Packet-capture debug commands
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This command enables the filter option for the raw packets. There are 32 filter options that can be
configured within a single filter. The filter index limit ranges from 1 through 20.
Brocade# debug packet-capture filter 2 protocol
debug packet-capture mode
Syntax: [no] debug packet-capture mode [brief | no-display | normal | pcap-fmt
•
•
•
•
•
•
This command displays the format of the packets to be captured for debugging information.
46
ether-type—Matches the Ethernet type packets
fdp—Matches wit h the FDP
in-port—Matches the input port
l2-802.1w—Matches the 802.1w BPDU
l2-lacp—Matches the LACP PDU
l2-mstp—Matches the MSTP BPDU
l2-stp—Matches the spanning tree BPDU
l3-bgp—Matches with the BGP
l3-ospf—Matches the OSPF protocol
l3-vrrp—Matches the VRRP
l3-vrrpe—Matches the VRRP-E
lldp—Matches the LLDP
mrp—Matches the MRP
out-port—Matches the output port
priority—Matches the priority
protocol—Matches the IP
pvst—Matches the PVST protocol
sa—Matches the source MAC address
snmp—Matches the SNMP
spa—Matches the source IP address
sport—Matches the source protocol port
udld—Matches the UDLD protocol
vlan-id—Matches the VLAN ID
vsrp—Matches the VSRP
[default | decimal]]
brief—Specifies the increment counters and displays the packet summary.
no-display—Specifies the increment counters alone.
normal—Specifies the increment counters and displays the packet header and the first 48 raw
bytes.
pcap-fmt—Specifies the increment counters and dumps the packet in pcap (packet capture)
hexadecimal format.
default—Specifies the normal mode.
decimal—Specifies the first 48 bytes of the packets received.
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01