Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 51

Name
A-satya-000000147d80
A-satya-000000c74d40
show cluster ccp client
Syntax: show cluster cluster_name | cluster_id ccp client client_ID
•
•
•
This command displays the registered CCP clients such as cluster manager, MDUP, or STP.
The following output is displayed when the show cluster command is configured with the cluster ID.
Brocade# show cluster 3000 ccp client
Client Node Info:
-----------------
Name: cluster_mgr
Peer Node Info:
Peer IP: 10.1.1.2
Client Node Info:
-----------------
Name: mdup
Peer Node Info:
Peer IP:
Registered Events:
Client Node Info:
-----------------
Name: stp
Peer Node Info:
Peer IP:
Registered Events:
Client Node Info:
-----------------
Name: mcast
Peer Node Info:
Peer IP:
Registered Events:
Client Node Info:
-----------------
Name: vrrp
Peer Node Info:
Peer IP:
Registered Events:
The following output is displayed when the show cluster command is configured with the cluster
name.
Brocade# show cluster SX ccp client
Client Node Info:
-----------------
Name: cluster_mgr
Peer Node Info:
Peer IP: 10.1.1.2
Client Node Info:
-----------------
Name: mdup
Peer Node Info:
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
cluster_name—Specifies the cluster name.
cluster_id—Specifies the cluster port number.
client_ID—Specifies the client port ID.
ID: 1
Registered Events:
ID: 2 Cluster ID: 3000
All Peers
PACKET_RECEIVED
ID: 4 Cluster ID: 3000
All Peers
All Events
ID: 8 Cluster ID: 3000
All Peers
All Events
ID: 16 Cluster ID: 3000
All Peers
All Events
ID: 1
Registered Events:
ID: 2 Cluster ID: 3000
Rbridge-id Config
3318 Deployed
2668 Deployed
Cluster ID: 3000
All Events
Number of Peers: 1
Number of Peers: 1
Number of Peers: 1
Number of Peers: 1
Cluster ID: 3000
All Events
Number of Peers: 1
MCT show commands
Port Trunk FSM-State
4/17 3 Admin Up
3/13 2 Up
Number of Peers: 1
Number of Peers: 1
3
39