Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 78

4
OSPF debug commands
debug ip ospf packet
Syntax: [no] debug ip ospf packet [ detail decimal | in | out | peer ip-addr | port [ethernet
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This command generates information about the OSPF packets.
Brocade# debug ip ospf packet
Brocade# OSPF: recv from:10.1.14.1 to 224.0.0.5 Intf:e 2/1/14 LS-Ack L:104 Auth:0
ID:10.213.213.213
OSPF: recv from:10.1.18.2 to 224.0.0.5 Intf:ve 18
ID:10.213.213.213
OSPF: send to:224.0.0.5 Intf:ve 36 Hello L:44 Auth:0 ID:10.10.10.77 DR:10.36.2.1
BDR:0.0.0.0
OSPF: send to:224.0.0.5 Intf:ve 36
DR:10.36.100.1 BDR:0.0.0.0
OSPF: send to:224.0.0.5 Intf:ve 511
DR:10.1.251.7 BDR:10.1.251.6
OSPF: send to:224.0.0.5 Intf:e 2/1/14 Hello
DR:10.1.14.2 BDR:10.1.14.1
OSPF: send to:224.0.0.5 Intf:e 2/1/21 LS-Ack L:104 Auth:0 ID:10.10.10.77
OSPF: send to:224.0.0.5 Intf:e 2/1/21 Hello L:48 Auth:0 ID:10.10.10.77 DR:0.0.0.0
BDR:0.0.0.0
OSPF: send to:224.0.0.5 Intf:ve 35
DR:10.1.35.16 BDR:10.1.35.15
OSPF: send to:10.1.251.6 Intf:ve 511 Hello L:48 Auth:0 ID:10.10.10.77 DR:0.0.0.0
BDR:0.0.0.0
OSPF: send to:10.1.18.2 Intf:e 4/1/12 Hello L:48 Auth:0 ID:10.10.10.77 DR:0.0.0.0
BDR:0.0.0.0
OSPF: recv from:10.1.35.15 to 224.0.0.5 Intf:ve 35
ID:41.41.41.41
OSPF: recv from:10.1.251.18 to 10.1.251.17 Intf:e 2/1/21 Hello
ID:10.116.116.1 DR:0.0.0.0 BDR:0.0.0.0
OSPF: recv from:10.1.34.10 to 224.0.0.5 Intf:ve 34
ID:49.2.3.4
66
stackid/slot/port | ve decimal] src-ip ip-addr | type [ack | dd | hello | request | update]]
detail decimal—Refers to the level by bit 0 and 1 and stack trace send by bit 2.
in—Refers only to the input.
out—Refers only to the output.
peer ip-addr—Matches with the peer (advertisement router).
port—Matches with the I/O port.
ethernet stackid/slot/port—Refers to the stack ID, slot, or Ethernet port.
ve decimal—Refers to the number of the virtual Ethernet interface.
src-ip ip-addr—Matches with the src-ip option and only to the input.
type—Matches with the packet type.
ack—Refers to the acknowledgement of the packets received.
dd—Refers to the number of days.
hello—Refers to the hello interval period.
request—Refers to the request sent from a client to a server.
update—Refers to the update to the packets.
LS-Ack L:104 Auth:0
Hello L:44 Auth:0 ID:10.10.10.77
Hello L:48 Auth:0 ID:10.10.10.77
L:48 Auth:0 ID:10.10.10.77
Hello L:48 Auth:0 ID:10.10.10.77
LS-Ack L:104 Auth:0
LS-Ack L:104 Auth:0
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
L:48 Auth:0
53-1002965-01