Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 169

join_prune_timer, (10.11.99.99 227.1.1.1) ->num=1, rpt=0, am_rp_and_proxy=0, JOI
N
join_prune_timer, (10.11.99.99 227.1.1.1) ->num=1, rpt=0, spt=1, SRC=v100, RP=v1
00
join_prune_timer, (10.11.99.99 227.1.1.1) fail RPT PRUNE cond.
Begin sending Join/Prune msg to v100, rpf_nbr=10.10.10.129,
group address: 227.1.1.1
send_J/P_msg(), lcl_adr=10.10.10.119 dest=224.0.0.13 pkt_size=42 to v100
Brocade# Proc IGMP join g=227.1.1.1 from v300(2/1/17) 10.11.55.55
Brocade# join_prune_timer, (10.11.99.99 227.1.1.1) ->num=1, rpt=0,
am_rp_and_proxy=0, JOIN
join_prune_timer, (10.11.99.99 227.1.1.1) ->num=1, rpt=0, spt=1, SRC=v100, RP=v1
00
join_prune_timer, (10.11.99.99 227.1.1.1) fail RPT PRUNE cond.
join_prune_timer, (0.0.0.0 227.1.1.1) rp not local, send join or prune, wc=1, rp
t=1
Begin sending Join/Prune msg to v100, rpf_nbr=10.10.10.129,
group address: 227.1.1.1
send_J/P_msg(), lcl_adr=10.10.10.119 dest=224.0.0.13 pkt_size=406 to v100
reset age (10.11.99.99, 227.1.1.1)
Brocade# show ip pim group | i 227.1.1.1
Index 7 Group 227.1.1.1
debug ip pim join-prune
Syntax: [no] debug ip pim join-prune
This command controls join prune processing and displays debugging information related to the
join prune messages. The following is the truncated sample output from the debug ip pim
join-prune command.
Brocade# debug ip pim join-prune
PIM:
Brocade#
PIM.VRF0: (10.0.0.168 232.0.0.6) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.7) RPFIf v75. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.168 232.0.0.7) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.8) RPFIf v75. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.168 232.0.0.8) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.9) RPFIf v75. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.168 232.0.0.9) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.10) RPFIf v75. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.168 232.0.0.10) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.11) RPFIf v75. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.168 232.0.0.11) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.12) RPFIf v75. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.168 232.0.0.12) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.13) RPFIf v75. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.168 232.0.0.13) RPFIf v76. RPFNbr -. Send Join/Prune
PIM.VRF0: (10.0.0.178 232.0.0.14) RPFIf v75. RPFNbr -. Send Join/Prune
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
Join list: (10.11.99.99 227.1.1.1) wc=0 rpt=0 sparse=1
Join list: (10.10.10.129 227.1.1.1) wc=1 rpt=1 sparse=1
Join list: (10.10.10.129 227.1.1.1) wc=1 rpt=1 sparse=1
Join list: (10.11.99.99 227.1.1.1) wc=0 rpt=0 sparse=1
join-prune debugging is on
PIM.VRF0: (10.0.0.178 232.0.0.6) RPFIf v75. RPFNbr -. Send Join/Prune
PIM debug commands
6
157