Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 211

show tech-support cluster
Collects and displays complete debugging information related to Multi-Chassis Trunking (MCT)
cluster configuration.
Syntax show tech-support cluster
Parameters None
Modes Privileged EXEC mode
Command The show tech-support cluster command output includes the output of the show cluster and the
Output show cluster ccp peer detail commands. The show tech-support cluster command output displays
the following information:
•
•
•
•
•
•
•
•
•
Examples The following example displays sample output from the show tech-support cluster command.
Brocade# show tech-support cluster
Cluster Configuration information
cluster SX 3000
SX-MCT ethernet 1/7
client-1
deploy
Cluster SX 3000
============
Rbridge Id: 3, Session Vlan: 3000, Keep-Alive Vlan: 3001
Cluster State: Deploy
Client Isolation Mode: Loose
Member Vlan Range: 10 20 30
MCT Peer's Reachability using Keep-Alive Vlan: Peer Reachable
ICL Info:
---------
Name
SX-MCT
Peer Info:
----------
Peer IP: 10.20.152.21, Peer Rbridge Id: 2, ICL: SX-MCT
KeepAlive Interval: 10 , Hold Time: 90, Fast Failover
Active Vlan Range:
Last Reason for CCP Down: ICL VE interface down State: CCP Up (Up Time:
5 hr:42 min:13 sec)
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
Cluster configuration
Spanning Tree Protocol (STP), if configured
Rapid Spanning Tree Protocol (RSTP), if configured
Peer details
Cluster Communication Protocol (CCP)
Last reason for CCP down
Inter-Chassis Link (ICL)
MCT client
Transmission Control Protocol (TCP) connection
rbridge-id 2
peer 1.1.1.2 rbridge-id 3 icl SX-MCT
rbridge-id 100
!
Port Trunk
7/5 4
10 20 30
show tech-support cluster
session-vlan 3000
client-interface ethernet 1/5
keep-alive-vlan 3001
deploy client
0 days:
9
icl
199