Brocade Communications Systems FastIron SX Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Brocade Communications Systems Manuals
  4. Chassis
  5. FastIron SX Series
  6. Hardware installation manual
Brocade Communications Systems FastIron SX Series Hardware Installation Manual

Brocade Communications Systems FastIron SX Series Hardware Installation Manual

Hide thumbs Also See for FastIron SX Series:
Table of Contents

Advertisement

Quick Links

Download this manual
53-1002219-02
®
9 December 2011
Brocade FastIron SX Series
Chassis
Hardware Installation Guide
Supporting software release 07.3.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FastIron SX Series and is the answer not in the manual?

Questions and answers

Related Manuals for Brocade Communications Systems FastIron SX Series

Summary of Contents for Brocade Communications Systems FastIron SX Series

  • Page 1 53-1002219-02 ® 9 December 2011 Brocade FastIron SX Series Chassis Hardware Installation Guide Supporting software release 07.3.00...
  • Page 2 Brocade Assurance, Brocade NET Health, Brocade One, CloudPlex, MLX, VCS, VDX, and When the Mission Is Critical, the Network Is Brocade are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names mentioned are or may be trademarks or service marks of their respective owners.

  • Page 3: Table Of Contents

    Unpacking the system........37 Brocade FastIron SX Series Chassis Hardware Installation Guide...
  • Page 4 Overview ..........77 Brocade FastIron SX Series Chassis Hardware Installation Guide...
  • Page 5 Removing a switch fabric module..... . .109 Installing a new switch fabric module ....110 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 6 Industry Canada statement .......159 Brocade FastIron SX Series Chassis Hardware Installation Guide...
  • Page 7 Dangers ..........171 Brocade FastIron SX Series Chassis Hardware Installation Guide...
  • Page 8 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 9: About This Document

    Identifies the names of user-manipulated GUI elements Identifies keywords Identifies text to enter at the GUI or CLI italic text Provides emphasis Identifies variables Identifies document titles text Identifies CLI output code Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 10: Command Syntax Conventions

    This document may contain references to the trademarks of the following corporations. These trademarks are the properties of their respective companies and corporations. These references are made for informational purposes only. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 11: Related Publications

    For the latest edition of these documents, which contain the most up-to-date information, go to http://www.brocade.com/ethernetproducts. Getting technical help or reporting errors Go to http://www.brocade.com/services-support/index.page for the latest e-mail and telephone contact information. To report documentation errors, send an e-mail to documentation@brocade.com. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 12 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 13: Product Overview

    Denial of Service (DoS) attack on the data plane. • Distributed data and control planes, which results in uncompromised wire-speed performance for the data plane and faster and more efficient performance of management functions for the control plane. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 14: Poe Port Density

    TABLE 2 Maximum number of PoE+ class (30W) ports per power supply Power Supply Number of FSX 800 FSX 1600 Power Supplies SX-ACPWR-PoE and SX-DCPWR-PoE SX-ACPWR-PoE and SX-DCPWR-PoE SX-ACPWR-PoE and SX-DCPWR-PoE Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 15: Supported Configurations

    Software features differ depending on the software version that is loaded on the device and the type of management module that is installed in the device. Refer to the FastIron Configuration Guide for a complete list of software features supported on your device. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 16: Poe And Poe+ Applications

    2-port management module and one 8-port management module together in the same device. Hardware features The FastIron X Series chassis devices are composed of the following major hardware components: • Chassis Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 17: Fsx 800 Chassis

    (RU) to the height of the chassis. Figure 1 shows the FSX 800 chassis and the component slots. FIGURE 1 FSX 800 chassis The FSX 800 chassis ships from the factory with the following components installed: Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 18 AC OK DC OK ALM AC OK DC OK ALM AC OK DC OK ALM Slot 1 Slot 8 Slot 2 Slot 9 Slot 3 Slot 10 Slot 4 Switch Fabric Slot 1 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 19: Fsx 1600 Chassis

    Eight slots for power supplies along the bottom of the card shelf Figure 3 shows the front of the FSX 1600 device. FIGURE 3 FSX 1600 device FSX 1600 devices ship from the factory with the following components installed: Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 20 (ESD) connector, into which you can plug an ESD wrist strap to ground yourself while handling and installing modules. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 21 13 Interface slot 13 Switch fabric slot 2 Interface slot 7 14 Interface slot 14 ESD ground connector DANGER For safety reasons, the ESD wrist strap should contain a series 1 megohm resistor. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 22: Management Modules

    IPv6 management modules SX-FIZMR no ports SX-FIZMR-6-PREM SX-FIZMR-6-PREM6 SX-FI2XGMR6 two 10-GbE ports SX-FI2XGMR6-PREM SX-FI2XGMR6-PREM6 NOTE 512 MB SDRAM supports large routing tables (1,000,000 BGP routes) with the full Layer 3 code. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 23 The 10/100/1000 RJ45 copper port on the management module enables you to attach a PC or terminal and access the system CLI or Web Management Interface directly or through a Telnet connection. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 24 The reset button on the management module allows you to restart the system. The reset button is recessed to prevent it from being pushed accidentally. The reset button is located next to the console port on the management module. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 25: Switch Fabric Modules

    FastIron X Series chassis device type. TABLE 7 Interface modules Interface Module Part Number FSX 800 FSX 1600 IPv4 Interface Modules 24-port Gigabit Ethernet Fiber (1000 SX-FI424F Mbps only) 24-port Gigabit Ethernet copper SX-FI424C without PoE Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 26 The following message indicates that the hot swap insertion of a module is completed: Module 1 is up and running The following console message indicates that the hot swap removal of a module is completed: Powering off the module in slot 1 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 27 FastIron uses virtual interfaces (VEs) to divide each physical link into two logical ports. These VEs can then be individually configured at the interface level. NOTE This interface module is not supported on FastIron SuperX devices. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 28 Table 19 on page 46. 48-port 10/100/1000 Mbps Ethernet PoE+ interface module limitations The following limitations apply to this module: • Q-in-Q and SAV (VLAN stacking) are not supported on this module Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 29 IPv4 24-port Gigabit Ethernet copper module front panel 424C 1 Port 1 13 Port 13 Port 24 2 Port 2 14 Port 14 Figure 10 shows the front panel of the IPv6 24-port Gigabit Ethernet copper module. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 30 The 24-port Gigabit Ethernet copper interface module with PoE+ supports both IPv4 and IPv6. Figure 11 shows the front panel of the IPv4 and IPv6 24-port Gigabit Ethernet copper interface module with PoE+. The module requires Ironware 7.3 or later for FastIron series. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 31 Ethernet fiber interface module have 24 ports with connectors for mini-GBIC transceivers (Small Form Factor Pluggable or SFP) Multisource Agreement (MSA)-compliant transceivers. The ports support both fiber and copper mini-GBICs in any combination. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 32 The front panel includes the following control features: • 24 Gigabit Ethernet fiber ports • 24 LEDs Figure 13 shows the front panel of the IPv4 and IPv6 24-port Gigabit Ethernet fiber module. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 33 (refer to Figure 13). The left-most LED is for Port 1, the second LED is for Port 2, and so on. The ports provide status information using the LEDs described in Table Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 34 FIGURE 14 IPv4 100/1000 hybrid fiber interface module front panel 424HF Port 1 Port 13 Port 2 Port 24 Figure 15 shows the IPv6 100/1000 hybrid fiber interface module front panel. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 35 LAN PHY or WAN PHY (LAN or WAN module only). On 2-port 10-Gigabit Ethernet interface modules supporting both IPv4 and IPv6, the transceivers support 10GBase-SR, 10GBase-LR, and 10GBase-ER fiber optic cabling for LAN. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 36 The port is not transmitting or receiving traffic. LEDs for IPv4 and IPv6 2-Port 10-Gigabit Ethernet module The 10 Gbps ports provide status information using the LEDs listed in Table Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 37 IPv4 8-port 10-Gigabit Ethernet module front panel. FIGURE 19 IPv4 and IPv6 8-port 10-Gigabit Ethernet interface module The 10 Gbps ports provide status information using the LEDs listed in Table Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 38: Network Interfaces

    M-FBXD or M-FBXU 100Base-FX M-FX, M-FXB1, or M-FXB2 100Base-FX-IR M-FX-IR 100Base-FX-LR M-FX-LR 100Base-FX-SR M-FX-SR 100Base-TX (copper only) M-TX 10GBase-1310-MMF 1310-MMF 10GBase-CX4 XG-CX4 10GBase-ER XG-ER 10GBase-LR XG-LR 10GBase-SR XG-SR 10GBase-ZR XG-ZR 10GBase-ZRD XG-ZRD Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 39: Port Regions

    PoE+. You can use any combination of the supported AC and DC supplies in the same device. The following information applies to PoE power supplies: • The SX-ACPWR2500-PoE requires 220-volt input. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 40 800, you can install a second 12-volt power supply for redundancy. The FSX 1600 comes with and requires two 12-volt power supplies and supports up to four 12-volt power supplies for redundancy. • PoE devices: Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 41 PoE+ power-consuming devices. The number of PoE+ power-consuming devices that one 52- 54-volt power supply can support depends on the number of watts required by each power-consuming device. Each 52- 54-volt power supply can provide a Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 42 In the FSX 1600 device, the system power supplies occupy slot numbers 1 – 4 in the top row with the redundant supplies in slot numbers 3 and 4. The PoE power supplies occupy slot numbers 5 – 8 in the bottom row. Figure 21 shows power supply placement. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 43 Although the model numbers for both the newer and older versions of the power supplies are identical, the front panels and the manufacturing part numbers are different. Figure 22 shows a side-by-side comparison of the SX-ACPWR-SYS replacement power supply and the original power supply. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 44 Refer to “Overview” on page 77. Hardware specifications for the power supplies are in the Chapter 7, “Hardware Specifications”. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 45 A FastIron device with redundant power supplies can maintain full operation when one or more power supplies fail. Power supply failure can be a failure of the supply itself or the office power grid connected to the power supply. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 46: Cooling System

    The cooling system is contained within the system fan tray assembly and modules. The following components comprise the cooling system: • The FSX and FSX 800 each have six four-speed fans. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 47: Built-In Mounting Brackets

    The FSX 1600 does not have built-in mounting brackets. Two brackets ship with the FSX 1600 that enable you to front-mount or center-mount the device in a rack. Contact Brocade Communications, Inc. for information about rack mount kits. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 48: Layer 3 Routing Protocol Table Sizes

    Use the show default values command to display Layer 3 routing protocol table sizes. The command output shows the default, maximum, and currently configured values. Refer to the FastIron Configuration Guide for an example output. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 49: Installing Fastiron Sx Devices

    The mark is your assurance that the power cord can be used safely with the device. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 50: Installation Precautions

    A fully populated chassis is heavy. TWO OR MORE PEOPLE ARE REQUIRED WHEN LIFTING, HANDLING, OR MOUNTING THESE DEVICES. DANGER Make sure the rack or cabinet housing the device is adequately secured to prevent it from becoming unstable or falling over. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 51: Power Precautions And Warnings

    Disconnect the power cord from all power sources to completely remove power from the device. CAUTION Do not install the device in an environment where the operating ambient temperature might exceed 40 C (104 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 52 Compare this total with the rating limit for the circuit. The maximum ampere ratings are usually printed on the devices near the input power connectors. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 53: Preparing The Installation Site

    You must remove these screws before installing the chassis. Figure 25 shows the location of the screws. To perform this task, you need a #2 Phillips-head screwdriver. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 54: Installing The Chassis In A Rack

    TWO OR MORE PEOPLE ARE REQUIRED WHEN LIFTING, HANDLING, OR MOUNTING THESE DEVICES. DANGER Make sure the rack or cabinet housing the device is adequately secured to prevent it from becoming unstable or falling over. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 55 3. Start by mounting the chassis that goes in the lowest position in the rack, as shown in Figure 27. With two or more people lifting the chassis, slip the wide portion of each keyhole slot over the corresponding screw in the rack. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 56: Installing Mounting Brackets On The Fsx 1600 Chassis

    #2 Phillips or flathead screwdriver. Mount the brackets as shown in Figure Since the brackets are identical, you must rotate one bracket 90 degrees to fit on the opposite side from the first bracket. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 57: Removing The Slot Panels

    1. Loosen the screws on either end of the slot panel with a #2 Phillips-head or flathead screwdriver. 2. Pull the slot panel out of the chassis and store it in a safe place for future use. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 58: Installing Management And Interface Modules

    - install in slot 11, fills slots 11 and 13 - install in slot 12, fills slots 12 and 14 - install in slot 15, fills slots 15 and 17 - install in slot 16, fills slots 16 and 18 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 59 5. Use the #2 Phillips-head or flathead screwdriver to tighten the screws on each side of the module faceplate. The following illustrations show placement of management and interface modules in a FastIron X Series device. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 60 Installing management and interface modules FIGURE 29 Installing a management module in the FSX 800 chassis. FIGURE 30 Installing a management module in the FSX 1600 chassis. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 61 Installing management and interface modules FIGURE 31 Installing an interface module in the FSX 800 chassis. FIGURE 32 Installing an interface module in the FSX 1600 chassis. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 62 Installing management and interface modules FIGURE 33 Installing an SX-FI48GPP POE+ interface module in an FSX 800 device FIGURE 34 Installing an SX-FI48GPP POE+ interface module in an FSX 1600 device Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 63: Attaching A Management Station

    1. Connect a PC or terminal to the Console port or a 10/100/1000 Ethernet port using the appropriate cable. 2. Open the terminal emulation program, and set the session parameters as follows: • Baud: 9600 bps • Data bits: 8 • Parity: None • Stop bits: 1 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 64: Attaching A Switch To An Ethernet Port

    The FastIron X Series switch is designed to provide uninterrupted service even when you insert or remove the interface modules. Therefore, the system does not have a separate on or off power switch. To turn the system off, simply unplug the power cords. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 65 Powering on the system DANGER High Touch Current. Earth connection essential before connecting supply. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 66: Connecting Ac Power To The Chassis

    3. Snap the cord-retainer over the power plug to hold it in place, as illustrated in Figure FIGURE 35 Connecting the AC power cord on an FSX 800 device AC 4 AC 3 A C 2 A C 1 Cord retainer Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 67: Connecting Dc Power To The Chassis

    You can use a DC power source for the Brocade chassis using a DC-to-DC power supply. DC power must be supplied at 48 V and 30 A. To perform this task, you need the following items: Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 68 Figure 38 shows the location of the screws and lugs. FIGURE 38 Power lugs and cover screws DC IN DC OUT ALM Screws holding power lugs Screws holding transparent cover Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 69 #8 AWG power supply wire This equipment installation must meet NEC/CEC code requirements. Consult local authorities for regulations. FIGURE 40 Reconnect lugs to power supply. Chassis Rear View Detail – Ground DC power Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 70: Verifying Proper Operation

    “Installing management and interface modules” page 46. • If using AC power supplies, refer to the entry for the AC power supply LED in this table for more information. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 71 115 or 120V and 20A. If it is not, obtain a cable that is compatibly rated for the outlet. • Make sure that the wall outlet has power. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 72: Displaying The Module Status

    If you view the prompt FastIron> or similar, you are connected to the system and can display the status of the modules using the CLI. Enter the show module command at any CLI level. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 73 For more information, refer to “Installing management and interface modules” on page 46. • DISABLED – The module is not up and running. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 74 Verifying proper operation Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 75: Connecting Network Devices And Checking Connectivity

    Privileged EXEC – This level is also called the Enable level and can be secured by a password. You can perform tasks such as manage files on the flash module, save the system configuration to flash, and clear caches at this level. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 76: Recovering From A Lost Password

    NOTE Recovery from a lost password requires direct access to the serial port and a system reset. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 77: Configuring Ip Addresses

    Refer to the FastIron Configuration Guide for more information. The following procedure shows how to add an IPv4 address and mask to a router port. 1. At the opening CLI prompt, enter enable. Brocade> enable Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 78 Syntax: [no] ip address <ip-addr> <ip-mask> [secondary] Syntax: [no] ip address <ip-addr>/<mask-bits> [secondary] Use the secondary parameter if you have already configured an IP address within the same subnet on the interface. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 79: Ipv6 Devices

    Brocade IPv6 devices support the 128-bit addressing format, composed of 8 fields of 16-bit hexadecimal values separated by colons (:). For example, 2001:0000:0000:0200:002D:D0FF:FE48:4672 is an IPv6 address, which can also be expressed as 2001:0:0:200:2D:D0FF:FE48:4672 after omitting the leading zeros. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 80 EUI-64 Interface ID as the address for the interface. Link-local IPv6 addresses are also supported. For details, refer to the FastIron Configuration Guide. Syntax: enable [<password>] Syntax: configure terminal Syntax: [no] ipv6 address <ipv6-prefix>/<prefix-length> Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 81 You must specify the <ipv6-prefix> variable in hexadecimal using 16-bit values between colons as documented in RFC 2373. You must specify the <prefix-length> variable in decimal value. A slash mark (/) must follow the <ipv6-prefix> variable and precede the <prefix-length> variable. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 82: Connecting Network Devices

    For more information about this feature, refer to the FastIron Configuration Guide. FIGURE 41 UTP crossover cable UTP Crossover Cable 10/100BaseTX Unused - - Unused Unused - - Unused Unused - - Unused Unused - - Unused Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 83: Connecting To Workstations, Servers, Or Routers

    To connect a Brocade device to another network device using a fiber port, you must do the following: • Install a fiber optic module (SFP transceiver or mini-GBIC for Gigabit Ethernet ports, or XFP-MSA or SFP+ MSA transceiver for 10-Gigabit Ethernet ports) Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 84 1. Remove the protective covering from the fiber optic module and store it for future use. 2. Before cabling a fiber optic module, it is strongly recommended that you clean the cable connectors and the port connectors. Refer to “Cleaning fiber optic modules”. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 85: Automatic Mdi Or Mdix Detection

    (AWG). This cable can be purchased from Brocade. Refer to part number CAB-CX4-0050 when ordering. Refer to Figure NOTE The CX4 transceiver is not hot-swappable. FIGURE 43 CX4 transceiver CX4 transceiver Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 86: Testing Network Connectivity

    LED, possible abnormal states of each LED, and what to do if an LED indicates an abnormal state. NOTE Some modules use combined link and activity LEDs. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 87: Troubleshooting Network Connections

    For the indicated port, verify that both ends of the cabling (at the Brocade device and the connected device) are snug. • Verify that the Brocade device and the connected device are both powered on and operating correctly. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 88: Support For Digital Optical Monitoring

    XFP or SFP manufacturer’s recommended thresholds. For details about this feature and how to configure it, refer to the FastIron Configuration Guide. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 89: Managing The Chassis And Modules

    Temperature readings and thresholds of the switch fabric modules (FSX 800 and FSX 1600 only) • The MAC address of the chassis The following shows an example of the show chassis command output on the FSX 800. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 90 6 Temperature: empty Slot 7 Temperature: empty Slot 8 Temperature: empty Slot 9 Temperature: 39.0 deg-C Slot 10 Temperature: 41.5 deg-C 1 Temperature: 49.5 deg-C 2 Temperature: empty Boot Prom MAC: 00e0.beef.0000 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 91 4 Temperature: empty Slot 5 Temperature: empty Slot 6 Temperature: empty Slot 7 Temperature: empty Slot 8 Temperature: empty Slot 9 Temperature: 34.5 deg-C Slot 10 Temperature: 41.0 deg-C cont’d on next page... Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 92 Power Supply 5 is the bottom left-most slot, and Power Supply 8 is the right-most slot. These numbers assume you are facing the front of the chassis, not the rear. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 93 The temperature of each module. • On the FSX 800 and FSX 1600, the management modules are in slots 9 and 10 and the switch fabric modules are SF 1 and SF 2. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 94: Managing The Cooling System

    Fan speed modes The fans can operate in automatic or manual mode. The default is automatic mode. This section describes both methods. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 95 Typically, the fans operate in automatic mode, as described above. If desired, you can manually set the speed at which the fans will operate. For more information, refer to “Manually setting the fan speed” on page 87. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 96 If the temperature of any thermal plane exceeds the high temperature threshold for any of the fan speeds, the software sends a message to the system log. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 97 Brocade device will accept the following values because the low temperature threshold for the high speed (67 C) is lower than the high temperature threshold (72 C) for the medium-high speed. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 98 Speed 4: 50<----->80 deg-C (shutdown) Rule 3/3 (SWITCH FABRIC CARDS THERMAL PLANE)***active***: Speed 1: NM<----->57 deg-C Speed 2: 48<----->58 deg-C Speed 3: 49<----->59 deg-C Speed 4: 50<----->80 deg-C (shutdown) Syntax: show chassis Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 99: Monitoring The Cooling System

    <fan-speed> can be one of the following. 1 – low 2 – medium-low 3 – medium 4 – high Monitoring the cooling system You can monitor the following aspects of the cooling system: Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 100 Fan 3 ok, speed (auto): 1<->[[2]]<->3<->4 Fan 4 ok, speed (auto): 1<->[[2]]<->3<->4 Fan 5 ok, speed (auto): 1<->[[2]]<->3<->4 Fan 6 ok, speed (auto): 1<->[[2]]<->3<->4 Syntax: show chassis For each fan, the display shows the following information. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 101: Displaying The Syslog Configuration And Static And Dynamic Buffers

    CLI. Brocade> show logging Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Buffer logging: level ACDMEINW, 7 messages logged level code: A=alert C=critical D=debugging M=emergency E=error I=informational N=notification W=warning Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 102 (at the bottom of the log) to make room for new ones. The static and dynamic buffers are both displayed when you display the log. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 103: Syslog Messages For Pci (Hardware) Errors

    If desired, you can disable power to a switch fabric module and then re-enable it. To disable the power, enter the following command at the Privileged EXEC level of the CLI. Brocade# disable switch-fabric 1 Syntax: disable switch-fabric 1 | 2 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 104: Displaying Management Module Cpu Usage

    31 percent busy, from 3248 sec ago sec avg: 31 percent busy sec avg: 31 percent busy sec avg: 31 percent busy 300 sec avg: 31 percent busy Syntax: show cpu Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 105: Removing Mac Address Entries

    For the <port> parameter, enter the Ethernet port whose MAC address you want to remove. Use the vlan <number> parameter to remove all MAC addresses for a specified VLAN. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 106 Removing MAC address entries Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 107: Using A Redundant Management Module

    (You can change the default active slot using the set-active-mgmt command. For information about performing this task, refer to “Changing the default active chassis slot” page 98.) Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 108: Management Module Switchover

    10 to be the standby module, you can perform a manual switchover using the switch-over-active-role command. For information about performing this task, refer to “Manually switching over to the standby management module” on page 100. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 109: Switchover Implications

    After the role of the active management module switches from one module to another, you must be aware of implications that affect the following areas: • Management sessions • Syslog and SNMP traps • MAC addresses The following sections explain the implications for these areas. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 110: Management Module Redundancy Configuration

    To remove the configuration, use the no form of the command. You cannot use the erase startup command to remove the configuration. To view the default active chassis slot currently configured on the device, use the show run command. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 111: Managing Management Module Redundancy

    Each active and standby management module also includes boot code, which is the code a module runs when it first starts up. The boot code resides in each module’s boot flash. The boot code is synchronized between the two modules. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 112: Manually Switching Over To The Standby Management Module

    For details, refer to the FastIron Configuration Guide. You can cause the system to switch over to the standby module (and thus make it the active module). To do so, enter the following command. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 113: Rebooting The Active And Standby Management Modules

    To reboot the device from a TFTP server through a fiber connection, use the CLI command boot system tftp <ip-address> <filename> fiber-port. For example, to reboot the active and standby management modules, enter the following command at the Privileged EXEC level. Brocade# reload Syntax: reload Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 114: Monitoring Management Module Redundancy

    Software You can use the show module CLI command to display the status of the management modules. The following shows an example output of the show module command. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 115: Displaying Temperature Information

    Slot 10 Temperature: 34.0 deg-C Syntax: show chassis The output displays the temperature of the management modules. For information about all output generated by the show chassis command, refer to “Overview” on page 77. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 116: Displaying Switchover Information

    0d14h43m16s:N:powered On switch Fabric 0d14h43m09s:N:powered On switch Fabric 0d14h43m01s:I:Mgmt CPU1 slot 9 failed 0d14h43m01s:I:System: Warm start 0d14h43m01s:I:SNMP: read-only community added by from session FastIron SX 800 This output shows that one switchover occurred. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 117: Maintaining The Hardware

    You can also purchase this type of cleaner from the following Website. http://www.fisfiber.com When not using an SFP, SFP+ or XFP connector, make sure to keep the protective covering on. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 118: Replacing A Management Module

    An ESD wrist strap with a plug for connection to the ESD connector on the chassis. DANGER For safety reasons, the ESD wrist strap should contain a series 1 megohm resistor. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 119: Installing A New Management Module

    6. Push the ejectors toward the center of the module. This action will fully seat the module in the backplane. Use a #2 Phillips-head or flathead screwdriver to tighten the two screws at either end of the management module’s front panel. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 120 Replacing a management module FIGURE 47 Installing a management module in the FSX 800 chassis Management module Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 121: Replacing A Switch Fabric Module (Fsx 800 And Fsx 1600 Only)

    Removing a switch fabric module You can remove a switch fabric module from the chassis while it is powered on and running. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 122: Installing A New Switch Fabric Module

    4. Push the ejectors toward the center of the module. This action will fully seat the module in the backplane. 5. Use a #2 Phillips-head or flathead screwdriver to tighten the two screws at either end of the switch fabric module’s front panel. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 123 Replacing a switch fabric module (FSX 800 and FSX 1600 only) FIGURE 49 Installing a switch fabric module in the FSX 800 Switch Fabric module FIGURE 50 Installing a switch fabric module in the FSX 1600 Switch Fabric module Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 124: Replacing An Interface Module

    An ESD wrist strap with a plug for connection to the ESD connector on the chassis. DANGER For safety reasons, the ESD wrist strap should contain a series 1 megohm resistor. • A #2 Phillips-head or flathead screwdriver. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 125: Removing An Interface Module

    If you do not install a module in a slot, you must keep the slot panel in place. If you run the chassis with an uncovered slot, the system will overheat. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 126: Installing A New Interface Module

    You do not need to enable an interface module after inserting it in the chassis. The FastIron X Series chassis device automatically enables the module when you insert it into a live chassis or when you power on the chassis. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 127 Replacing an interface module FIGURE 51 Installing an interface module in the FSX 800 chassis Interface module Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 128: Disabling And Re-Enabling An Interface Module

    To disable a module, enter a command such as the following at the Privileged EXEC level of the CLI. Brocade# disable module 3 This command disables the module in slot 3. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 129: Installing Or Replacing A Poe Daughter Card

    • Use the #2 Phillips-head or flathead screwdriver to loosen and remove the two screws on the left and right ends of the 24-port module. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 130 Connector slots for POE daughter card Connector slots • Remove the POE daughter card from its packaging. The POE daughter card is keyed to prevent improper insertion, as shown in Figure Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 131 • Use a #2 Phillips-head or flathead screwdriver to tighten the two screws at both ends of the module front panel. 6. Observe the console. The following message will appear. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 132: Replacing A Copper Or Fiber Optic Module

    2. Disconnect the copper or fiber cable connectors from the port connectors. 3. Insert the protective covering into the port connectors. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 133: Installing A New Copper Or Fiber Optic Module

    An ESD wrist strap with a plug for connection to the ESD connector on the chassis. DANGER For safety reasons, the ESD wrist strap should contain a series 1 megohm resistor. To install a copper or fiber optic module, perform the following tasks. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 134: Cabling A Fiber Optic Module

    Connecting power to the chassis • Verifying proper operation Determining which power supply failed To determine which power supply has failed, enter the following command at any CLI command prompt. Brocade# show chassis Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 135: Removing An Ac Power Supply

    (replacement or original). Be sure to refer to the appropriate procedures in this section. For the differences between replacement and original power supplies, refer to “Replacement power supplies” on page 31. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 136 5. Install a new power supply in the slot. For information about performing this task, refer to “Installing a new power supply” on page 128. Removing an original power supply The following illustration shows the original power supplies. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 137: Removing A Dc Power Supply

    5. Install a new power supply in the slot. For information about performing this task, refer to “Installing a new power supply” on page 128. Removing a DC power supply You can order a new DC power supply from Brocade Communications, Inc.. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 138 Otherwise, you could be injured or the power supply or other parts of the device could be damaged. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 139 • The latch should spring open • Gently push the latch to the right 1. Push Latch Release In 2. Push Eject Latch to the Right 3. Pull Power Supply Out Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 140: Installing A New Power Supply

    Once the screw is loosened, the latch will spring gently forward and down. 2. Insert the new power supply into the empty power supply slot as shown in Figure Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 141 4. When the power supply is fully seated, tighten the retaining screw as shown in Figure 5. Connect power to the chassis. Refer to “Connecting AC power to the chassis” on page 132. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 142 Installing or replacing a power supply FIGURE 59 Installing a replacement power supply 1. Slide the power supply Into the chassis 2. Push latch up until it locks into place 3. Tighten the retaining screw Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 143 4. Connect power to the chassis. Refer to “Connecting AC power to the chassis” on page 132 or “Connecting DC power to the chassis” on page 134. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 144: Connecting Ac Power To The Chassis

    2. Lift the cord-retainer and connect a Brocade-supplied AC power cord to the power supply. 3. Snap the cord-retainer over the power plug to hold it in place, as illustrated below. AC 4 AC 3 A C 2 A C 1 Cord retainer Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 145 (steady), which indicates the power supply is providing power to the chassis components. If it is amber or OFF, the power supply is not providing power to the chassis components. The ALM LED should be OFF. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 146: Connecting Dc Power To The Chassis

    3. Use a Phillips-head screwdriver to remove each of the power lugs. 4. Crimp #8 AWG input wire into the power lugs and reconnect the power lugs to the power supply unit. #8 AWG power supply wire Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 147 Installing or replacing a power supply – Ground Chassis Rear View Detail – Ground DC power Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 148: Verifying Proper Operation

    • Make sure that the DC power source is 48VDC @ 37.0 A. • Make sure that the power source has power. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 149: Displaying The Status Of The Power Supplies

    To replace the fan tray, you need the following: • A new fan tray, which you can order from Brocade • In addition to the above, you might also need a #2 Phillips-head screwdriver. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 150 DANGER Be careful not to accidentally insert your fingers into the fan tray while removing it from the chassis. The fans may still be spinning at a high speed. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 151: Replacing The Fsx 1600 Fan Assemblies

    An ESD strap (provided with the fan assembly kit) or an ESD wrist strap with a plug for connection to the ESD connector on the chassis. • In addition to the above, you might also need a #2 Phillips-head screwdriver. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 152 4. Insert the new fan assembly into the fan slot and push the enclosure in until the face plate is flush with the chassis. Pushing the enclosure in seats the fan connector with the chassis connector. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 153: Replacing The Air Filter In The Fastiron Sx-1600

    Air filter removal and replacement for FastIron SX-1600 Fan Tray Filter Direction Airflow in Chassis Filter Grab-strap Filter Retainer 3. Unhook the filter retainer from the air filter and discard the used filter. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 154 5. Attach the hook on the back of the filter retainer to the filter grab-strap. 6. Push the filter retainer into the chassis and tighten the captive fasteners. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 155: Hardware Specifications

    For optimal performance, operate or store your Brocade device in compliance with the following environmental conditions. TABLE 29 Environmental conditions for the chassis Description Range Operating Environment     Operating temperature – 40 C (32 – 104 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 156: Cooling

    The fans cool the CPU, main memory, and voltage regulators. The fans move the air from the left side of the device to the right side of the device as shown in Figure • Total air flow: 127 CFM * 6 (qty) = 762 CFM Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 157 FSX 1600 chassis. The noise level varies on each side of the chassis and is highest at the rear of the chassis where the fans are located. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 158: Regulatory Compliance

    Front Left Right Rear FIGURE 65 Internal airflow in the FSX 1600 Regulatory compliance Table 31 lists the Electromagnetic Compatibility (EMC), Immunity standards, and safety agency approvals for the FastIron Chassis. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 159: Maximum Power Consumption

    Switch Fabric module in the FSX 1600 chassis 2-port 10-GbE interface module, including fiber optics 2-port (SFP+) 10-Gigabit Ethernet interface module 8-port (SFP+) 10- Gigabit Ethernet interface module 24-port GbE copper interface module Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 160: Power Source Interruptions

    An AC loss of >15ms will cause the power supply to shut down due to input under-voltage Pinouts and signalling This section lists the pinouts for the DB-9 connector and RJ-45 port jacks. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 161 Console port pin assignments showing cable connection options to a terminal or PC DB-9 to DB-9 DB-9 to DB-25 Terminal or PC Terminal or PC Female Switch Female Switch Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 162 MDI-X ports Pin Number MDI-X ports Pin Assignment MDI-X ports Pin Number MDI-X ports Pin Number Not used Not used Not used Not used Not used Not used Not used Not used Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 163: Cable Specifications

    LC connector for 1310/1490 10000 (10 SFP module 100Base-FX-SR LC connector for 62.5 up to 2000 (2 SFP module 100Base-FX-IR LC connector for 1310 up to 15000 SFP module (15 km) Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 164: Power Cords

    All of the FastIron devices ship with US-compatible power cords unless otherwise specified at the time of order. United Kingdom- and European-compatible power cords are also available. Refer to “Input connector and plug” on page 155. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 165: Power Supply Specifications

    Operating temperature to 40 C, 23 to 122 to 40 C, 23 to 40 C, 23   Relative humidity 0 – 95%, non-condensing 0 – 95%, 0 – 95%, non-condensing non-condensing Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 166: Electrical Specifications

    100 – 240 VAC, 14.3 amps at 100 30 amps peak 1200 watts of total 4092 manufacturing part 50 – 60 Hz maximum output power number 32005-xxx 7.1 amps at 200 Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 167: Input Connector And Plug

    C20 type: UL/CSA 20A/250V, VDE 16A/250V Orientation: Ground pin down SX-ACPWR2500-POE 6-20 Connector SX-DCPWR-SYS and 2-position terminal block SX-DCPWR-POE The power supply is connected to Earth Ground through the power supply chassis. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 168 AC power cable plug and input connector for SX-ACPWR-SYS and SX-ACPWR-POE power supplies Figure 70 shows the power plug for the SX-ACPWR2500-POE power supply. FIGURE 70 AC power cable plug for SX-ACPWR2500-POE power supply Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 169 FCC Class A VCCI Class A EN55022 Class A Harmonic Current Emissions (Class A) - EN61000-3-2, with Amendment 14 (1999) Voltage Fluctuations and Flicker - EN61000-3-3 ICES-003 Class A AS/NZS 3548 Class A Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 170: Safety Warnings

    The SX-ACPWR-SYS with part number 32014-xxx and SX-ACPWR-POE with part number 32016-xxx, have additional safety warning labels as shown in Table 41 TABLE 41 Safety warning labels on power supplies !DANGER!: Don’t touch impeller Use caution when closing latch Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 171: Regulatory Statements

    This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Japan VCCI statement Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 172: Japan Denan Power Cord Statement

    If it is sold or purchased incorrectly, it should be exchanged with a home apparatus (Class B). Russia "C " -0560, : 29 2009 . 2012 . Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 173: Germany

    English translation of above statement Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 174 BSMI statement (Taiwan) Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 175: Caution And Danger Notices

    De no hacerse así, el suministro de corriente o el instrumento podrían resultar dañados. (El instrumento puede estar encendido mientras se instala o retira un suministro de corriente, pero el suministro de corriente en sí no deberá conectado a la corriente). Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 176 Compare esta suma con el límite nominal para el circuito. Las capacidades nominales de corriente máximas están generalmente impresas en los instrumentos, cerca de los conectores de corriente de entrada. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 177 Never leave tools inside the chassis. VORSICHT Lassen Sie keine Werkzeuge im Chassis zurück. MISE EN GARDE Ne laissez jamais d'outils à l'intérieur du châssis. PRECAUCIÓN No deje nunca herramientas en el interior del chasis. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 178 El conector debe rizarse con la herramienta apropiada, de manera que se conecte a los dos tornillos de tierra del recinto. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 179 Si no instala un módulo en la ranura, deberá mantener el panel de ranuras en su lugar. Si pone en funcionamiento el chasis con una ranura descubierta, el sistema sufrirá sobrecalentamiento. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 180 El cableado de entrada para la conexión al producto deberá ser de cable de cobre catalogado, 8 AWG, marcado con VW-1, y tener una capacidad nominal mínima para 90 grados centígrados. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 181 Si se intenta instalar el suministro de energía con el seguro cerrado se provocará un daño mecánico al suministro de energía y a la ranura del mismo. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 182 PRECAUCIÓN Un chasis FSX completamente cargado es extremadamente pesado. Por este motivo, Brocade recomienda la instalación del chasis FSX 1600 vacío en el armazón antes de instalar los módulos. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

  • Page 183: Dangers

    PELIGRO Verifique que el bastidor o armario que alberga el instrumento está asegurado correctamente para evitar que pueda hacerse inestable o que caiga. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 184 PELIGRO Verifique que circuitos de la fuente de corriente están conectados a tierra correctamente; luego use el cordón de potencia suministrado con el instrumento para conectarlo a la fuente de corriente. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 185 De no hacerlo así, podría sufrir daños personales o el suministro de corriente u otras piezas podrían resultar dañadas. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 186 Il est possible que le ventilateur tourne encore à grande vitesse. PELIGRO Procure no insertar los dedos accidentalmente en la bandeja del ventilador cuando esté desmontando el chasis. El ventilador podría estar girando a gran velocidad. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 187 DANGER Courant de fuite élevé. Mise à la terre obligatoire avant la connexion de l'alimentation. PELIGRO Alta tensión al tacto. La conexión a tierra es esencial antes de conectar la alimentación. Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...
  • Page 188 Dangers Brocade FastIron SX Series Chassis Hardware Installation Guide 53-1002219-02...

This manual is also suitable for:

Fastiron sx 800Fastiron sx 1600

Table of Contents