Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 178

6
PIM-SM snooping debug commands
debug pimsm-snoop physical-port ethernet
Syntax: [no] debug pimsm-snoop physical-port ethernet num
The num variable refers to the stack ID, slot number, and port number of a specific Ethernet port.
This command displays the PIM-SM snooping related debug information for the specified Ethernet
interface. Command output resembles the following example.
Brocade# debug pimsm-snoop physical-port ethernet 1/1/12
Brocade# PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Join/Prune from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Join/Prune from 10.27.27.2 port 1/1/12 on vlan 275
PIMv2 Hello from 10.27.27.2 port 1/1/12 on vlan 275
debug pimsm-snoop show
Syntax: [no] debug pimsm-snoop show
This command displays all the PIM-SM snooping debug settings. Command output resembles the
following example.
Brocade# debug pimsm-snoop show
pimsm-snoop debug-enable-any = 1
debug pimsm-snoop
debug pimsm-snoop physical_port e4/48 is enabled
debug pimsm-snoop error is enabled
debug pimsm-snoop control-source 10.85.1.3 is enabled
debug pimsm-snoop source
Syntax: [no] debug pimsm-snoop source source_address
This command displays the PIM-SM snooping related debug information for the specified source
address. Command output resembles the following example.
Brocade# debug pimsm-snoop source 10.27.27.5
Brocade# pim_snoop join (10.27.27.5 228.228.0.1), from e1/1/12
PRUNE
1/1/12 from (10.27.27.5, 228.228.0.2),
(10.27.27.5, 228.228.0.3),
Src=10.27.27.5 with 0 JOIN with 3 PRUNE, 1st Grp=228.228.0.1
PRUNE
166
is enabled
pim_snoop join (10.27.27.5 228.228.0.2), from e1/1/12
pim_snoop join (10.27.27.5 228.228.0.3), from e1/1/12
PIM from 10.27.27.2, vlan 275, port 1/1/12: Src=10.27.27.5 with 0 JOIN with 0
pim_snoop prune 1/1/12 from (10.27.27.5, 228.228.0.1),
pim_snoop join (10.27.27.5 228.228.0.1), from e1/1/12
pim_snoop join (10.27.27.5 228.228.0.2), from e1/1/12
pim_snoop join (10.27.27.5 228.228.0.3), from e1/1/12
PIM from 10.27.27.2, vlan 275, port 1/1/12: Src=10.27.27.5 with 0 JOIN with 0
pim_snoop prune 1/1/12 from
PIM from 10.27.27.2, vlan 275, port 1/1/12:
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
pim_snoop prune
53-1002965-01