Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 135

Brocade# PIMv6-CRP.VRF0: Sending Candidate RP Msg (size 46)
PIMv6-CRP.VRF0: Sending Candidate RP Msg (size 46)
debug ipv6 pim source
Syntax: [no] debug ipv6 pim source ipaddr
This command displays the IPv6 PIM related debugging information for the specified source
address. The following is the truncated output.
Brocade# debug ipv6 pim source 2001:DB8::200
Brocade# PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::1), parent:
NIL,Nil. olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::2), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::3), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::4), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::5), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::6), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::7), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::8), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::9), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::a), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::b), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::c), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::d), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::e), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::f), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::10), parent: NIL,Nil.
olist not empty
PIM.VRF0: Deallocated hw resources for (2001:DB8::200 ff0::11), parent: NIL,Nil.
olist not empty
debug ipv6 pim show
Syntax: debug ipv6 pim show
This command displays the IPv6 PIM debug settings.
Brocade# debug ipv6 pim show
pim6 debug-enable-any = 1
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
PIM6: source 2001:DB8::200 debugging is on
IPv6 PIM debug commands
5
123