Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 103

debug ipv6 mld group
Syntax: [no] debug ipv6 mld group ipv6addr
This command debugs the MLD group matching. The ipv6addr variable specifies the address of the
IPv6 route.
Brocade# debug ipv6 mld group ff03::26:2641
Brocade# debug ipv6 mld show
debug ip6 mld group ff03::26:2641 is enabled
Brocade# MLD send Query(t=130) V1, s=fe80::224:38ff:fe26:d900 0000::0000 to
VL888(all) rsp=10000 mld=24B, pkt=86B
MLD: rcvd Report-V1(ty=131)
S=fe80::200:3aff:fe01:3a86, on VL611 (phy e6/48), mld_size=24
MLD: rcvd Leave(ty=132)
on VL611 (phy e6/48), mld_size=24
MLD: rcvd Query(ty=130) V1 g=ff03::26:2641 resp=10000, pkt
S=fe80::21b:f3ff:fe84:124, on VL611 (phy e8/1), mld_size=24
MLD: rcvd Query(ty=130) V1 g=ff03::26:2641 resp=1000, pkt
S=fe80::21b:f3ff:fe84:124, on VL611 (phy e8/1), mld_size=24
MLD: rcvd Query(ty=130) V1 g=ff03::26:2641 resp=1000, pkt
S=fe80::21b:f3ff:fe84:124, on VL611 (phy e8/1), mld_size=24
MLD del VL611 (e6/48) from group entry ff03::26:2641
debug ipv6 mld level
Syntax: [no] debug ipv6 mld level decimal
This command displays the different levels of debugging output, and it must be enabled in
combination with the other MLD debug commands. The decimal variable refers to the number of
the MLD level from 1 through 3.
Brocade# debug ipv6 mld level 1
MLD Debug level = 1
Brocade# Debug: Sep 19 16:44:07 MLD: rcvd Report-V1(ty=131)
resp=0, pkt S=fe80::200:bff:fe82:50f5, on VL1000 (phy 7/1/22), mld_size=24
Debug: Sep 19 16:44:07
Debug: Sep 19 16:44:07 MLD: rcvd Report-V1(ty=131)
S=fe80::200:bff:fe82:50f5, on VL1000 (phy 7/1/23), mld_size=24
Debug: Sep 19 16:44:07
Debug: Sep 19 16:44:07 MLD: rcvd Report-V1(ty=131)
S=fe80::200:bff:fe82:50f5, on VL1000 (phy 7/1/21), mld_size=24
Debug: Sep 19 16:44:07
Debug: Sep 19 16:44:07 MLD: rcvd Report-V1(ty=131)
S=fe80::200:bff:fe82:50f5, on VL1000 (phy 7/1/22), mld_size=24
Debug: Sep 19 16:44:07
Debug: Sep 19 16:44:07 MLD: rcvd Report-V1(ty=131)
S=fe80::200:bff:fe82:50f5, on VL1000 (phy 7/1/23), mld_size=24
Debug: Sep 19 16:44:07
Brocade# Debug: Sep 19 16:45:03 MLD send Query(t=130) V1,
s=fe80::224:38ff:fec6:d0c0 :: to VL1000(all) rsp=10000 mld=24B, pkt=86B
Debug: Sep 19 16:45:06 MLD: rcvd Report-V1(ty=131)
pkt S=fe80::200:bff:fe84:55ae, on VL1000 (phy 2/1/1), mld_size=24
Debug: Sep 19 16:45:06
Debug: Sep 19 16:45:07 MLD: rcvd Report-V1(ty=131)
pkt S=fe80::200:bff:fe82:50f5, on VL1000 (phy 7/1/21), mld_size=24
Debug: Sep 19 16:45:07
Debug: Sep 19 16:45:08 MLD: rcvd Report-V1(ty=131)
S=fe80::200:bff:fe82:50f5, on VL1000 (phy 7/1/22), mld_size=24
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
g=ff03::26:2641 resp=0, pkt
g=ff03::26:2641 resp=0, pkt S=fe80::200:3aff:fe01:3a86,
no routr fid, consume pkt
no routr fid, consume pkt
no routr fid, consume pkt
no routr fid, consume pkt
no routr fid, consume pkt
no routr fid, consume pkt
no routr fid, consume pkt
IPv6 MLD debug commands
g=ff04::24:2400
g=ff04::24:2401 resp=0, pkt
g=ff04::24:2402 resp=0, pkt
g=ff04::24:2403 resp=0, pkt
g=ff04::24:2404 resp=0, pkt
g=ff02::1:ff84:55ae resp=0,
g=ff02::1:ff82:50f5 resp=0,
g=ff02::1:ff20:84 resp=0, pkt
5
91