Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 117

This command displays debug information about NSM events as shown in the following example.
Brocade# debug ipv6 ospf nsm-events
OSPFv3:
Brocade(config-if-e1000-8/9)# Debug: Jan
HelloReceived at 733918, 1465981
Debug: Jan
1465981
Debug: Jan
Debug: Jan
1466183
Debug: Jan
1466183
Debug: Jan
Debug: Jan
1466363
Debug: Jan
1466363
Debug: Jan
debug ipv6 ospf nsm-status
Syntax: [no] debug ipv6 ospf nsm-status
This command displays information about the status of NSM as shown in the following example.
Brocade# debug ipv6 ospf nsm-status
OSPFv3:
Brocade(config-if-e1000-8/9)# Debug: Jan
Status change [Down]->[Init](HelloReceived)
Debug: Jan
Need Adjacency)
Debug: Jan
[2-way]->[ExStart](Need Adjacency)
Debug: Jan
[ExStart]->[ExChange](NegotiationDone)
Debug: Jan
[ExChange]->[Loading](Requestlist Not Empty)
Debug: Jan
[Loading]->[Full](LoadingDone)
debug ipv6 ospf packet
Syntax: [no] debug ipv6 ospf packet
This command displays all OSPFv3 packets in rx or tx mode as shown in the following example.
Brocade# debug ipv6 ospf packet
OSPFv3:
Brocade(config-ospf6-router)# Debug: Jan
OSPFv3: (fe80::224:38ff:fed6:7800->OSPFv3: ff02::5)
RtrID:10.2.2.2 DR:10.4.4.8 BDR:10.2.2.2
Debug: Jan
(fe80::224:38ff:fed6:7800->OSPFv3: ff02::5)
RtrID:10.2.2.2 DR:10.4.4.8 BDR:10.2.2.2
Debug: Jan
(fe80::224:38ff:fe21:6400->OSPFv3: ff02::5)
RtrID:10.4.4.8 DR:10.4.4.8 BDR:10.2.2.2
Debug: Jan
(fe80::224:38ff:fed6:7800->OSPFv3: ff02::5)
RtrID:10.2.2.2 DR:10.4.4.8 BDR:10.2.2.2
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
nsm-events debugging is on
1 20:04:10 OSPFv3: NSM[10.2.2.2, 644]: HelloReceived at 733918,
1 20:04:11 OSPFv3: NSM[644]: SendHello at 733932
1 20:04:19 OSPFv3: NSM[10.2.2.2, 644]: HelloReceived at 734019,
1 20:04:19 OSPFv3: NSM[10.2.2.2, 644]: HelloReceived at 734019,
1 20:04:20 OSPFv3: NSM[644]: SendHello at 734028
1 20:04:28 OSPFv3: NSM[10.2.2.2, 644]: HelloReceived at 734109,
1 20:04:28 OSPFv3: NSM[10.2.2.2, 644]: HelloReceived at 734109,
1 20:04:31 OSPFv3: NSM[644]: SendHello at 734133
nsm-status debugging is on
1 20:06:44 OSPFv3: NSM[10.2.2.2]: Status change [Init]->[2-way](No
1 20:07:19 OSPFv3: NSM[10.2.2.2]: Status change
1 20:07:24 OSPFv3: NSM[10.2.2.2]: Status change
1 20:07:24 OSPFv3: NSM[10.2.2.2]: Status change
1 20:07:24 OSPFv3: NSM[10.2.2.2]: Status change
packet debugging is on
1 17:20:18 OSPFv3: Rcv Hello on ve 9
1 17:20:23 OSPFv3: Snd Hello on ve 9 OSPFv3:
1 17:20:29 OSPFv3: Rcv Hello on ve 9
IPv6 OSPF debug commands
1 20:04:10 OSPFv3: NSM[10.2.2.2, 644]:
1 20:06:44 OSPFv3: NSM[10.2.2.2]:
1 17:20:18 OSPFv3: Rcv Hello on ve 9
OSPFv3:
OSPFv3:
5
105