Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 156

6
IGMP debug commands
eIGMP: rcvd Report-V2(t=22)
239.0.1.196, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.197, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.198, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.199, on v17 (phy 2/1/17), igmp_size=8
buIGMP: rcvd Report-V2(t=22)
239.0.1.200, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.201, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.202, on v17 (phy 2/1/17), igmp_size=8
gIGMP: rcvd Report-V2(t=22)
239.0.1.203, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.204, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.205, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.206, on v17 (phy 2/1/17), igmp_size=8
aIGMP: rcvd Report-V2(t=22)
239.0.1.207, on v17 (phy 2/1/17), igmp_size=8
lIGMP: rcvd Report-V2(t=22)
239.0.1.208, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.209, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.210, on v17 (phy 2/1/17), igmp_size=8
lIGMP: rcvd Report-V2(t=22)
239.0.1.211, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.212, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.213, on v17 (phy 2/1/17), igmp_size=8
IGMP: rcvd Report-V2(t=22)
239.0.1.214, on v17 (phy 2/1/17), igmp_size=8
Debug message destination:
All possible debuggings have been turned off
tracking is off and all results are cleared
Turn off stack trace of write table
Disable shadow register write will disable all writes from shadow to hardware
debug ip igmp physical-port ethernet
Syntax: [no] debug ip igmp physical-port ethernet stackid/slot/port
This command matches the physical port that is connected. The stackid/slot/port variable refers to
the stack ID, slot number, and port number of a specific Ethernet port.
Brocade# debug ip igmp physical-port ethernet 1/2/4
IGMP: rcvd Leave(t=23)
VL8 (phy 1/2/4), igmp_size=8
IGMP: No L3 mcast, pkt S=10.11.66.62 to 224.0.0.2, on v8 (phy 1/2/4), igmp_size=8
IGMP: rcvd Leave(t=23)
VL8 (phy 1/2/4), igmp_size=8
IGMP: No L3 mcast, pkt S=10.11.66.62 to 224.0.0.2, on v8 (phy 1/2/4), igmp_size=8
144
g=239.0.1.196 resp=100, pkt S=10.17.17.222 to
g=239.0.1.197 resp=100, pkt S=10.17.17.222 to
g=239.0.1.198 resp=100, pkt S=10.17.17.222 to
g=239.0.1.199 resp=100, pkt S=10.17.17.222 to
g=239.0.1.200 resp=100, pkt S=10.17.17.222 to
g=239.0.1.201 resp=100, pkt S=10.17.17.222 to
g=239.0.1.202 resp=100, pkt S=10.17.17.222 to
g=239.0.1.203 resp=100, pkt S=10.17.17.222 to
g=239.0.1.204 resp=100, pkt S=10.17.17.222 to
g=239.0.1.205 resp=100, pkt S=10.17.17.222 to
g=239.0.1.206 resp=100, pkt S=10.17.17.222 to
g=239.0.1.207 resp=100, pkt S=10.17.17.222 to
g=239.0.1.208 resp=100, pkt S=10.17.17.222 to
g=239.0.1.209 resp=100, pkt S=10.17.17.222 to
g=239.0.1.210 resp=100, pkt S=10.17.17.222 to
g=239.0.1.211 resp=100, pkt S=10.17.17.222 to
g=239.0.1.212 resp=100, pkt S=10.17.17.222 to
g=239.0.1.213 resp=100, pkt S=10.17.17.222 to
g=239.0.1.214 resp=100, pkt S=10.17.17.222 to
default (console)
g=225.1.1.31 resp=0, pkt S=10.11.66.62 to 224.0.0.2, on
g=225.1.1.32 resp=0, pkt S=10.11.66.62 to 224.0.0.2, on
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01