Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 214

9
show tech-support stack
show tech-support stack
Collects and displays debugging information related to stacking configurations.
Syntax show tech-support stack
Parameters None
Modes Privileged EXEC mode
Command The show tech-support stack command output displays the following information related to
Output stacking configurations:
•
•
•
•
•
•
•
The command output includes the output of the following commands:
•
•
•
•
•
•
•
NOTE
For information about the show commands, refer to the FastIron Ethernet Switch Stacking
Configuration Guide.
Examples The following example displays truncated output from the show tech-support stack command.
Brocade# show tech-support stack
Stacking Status.
alone: standalone, D: dynamic config, S: static config
ID
1 S ICX6610-24P
5 S ICX6610-24F
6 S ICX6450-24
2/6| 5 |2/1==2/1| 1 |2/6
202
Stacking status
Stack resource details
Stack IPC statistics
Port statistics for all stack ports
Stack IPC
Stack mail traffic statistics
Stack mailbox neighbors
show stacking
show stack resource
show stack rel-ipc
show statistics stack-ports
show stack ipc
dm stk show debug mail traffic
dm stk show debug mail neighbors
Type Role
active
standby 0000.0002.0100
member
standby active
+---+ +---+
+---+ +---+
active
--- +---+
Mac Address Pri State
0000.0001.0100 128 local
0 remote
0000.00b0.4fa0 0 remote
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
Comment
Ready
Ready
Ready
53-1002965-01