Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 200

9
show tech-support
0d00h00m11s:I:System: Stack unit 1 POE
capacity is up
Dynamic Log Buffer (50 lines):
0d00h31m23s:W:System:Stack unit 1 Fan speed changed automatically to 2
0d00h28m33s:W:System:Stack unit 1 Fan speed changed automatically to 1
0d00h22m33s:W:System:Stack unit 1 Fan speed changed automatically to 2
.
.
(output truncated)
show tech-support acl
Syntax: show tech-support acl
This command displays debugging information related to ACL configuration and counters.
Command output resembles the following example.
Brocade# show tech-support acl
ACL Config Information.
ipv6 access-list bvs: 52 entries
Standard IP access list 1
permit any
Standard IP access list 2
permit any
Standard IP access list 3
permit any
Standard IP access list 4
permit any
Standard IP access list 5
permit any
Extended IP access list 101
permit tcp any any
permit ip host 192.168.2.2 any
ACL-ON-ARP list information:
Port
ve2
ve3
ve4
ACL Accounting Information :
Traffic Policy - g_voip:
General Counters:
Port Region#Byte Count Packet Count
------------------ -------------------- ----------------------
7 (4/1 - 4/12) 85367040 776064
All port regions 84367040 776064
Rate Limiting Counters:
Port Region# Green Conformance Yellow Conformance Red Conformance
--------------------------------- ------------------ ----------------
7 (4/1 - 4/12) 329114195612139520 37533986897781760 0
All port regions
188
(hw usage : 2)
(hw usage : 1)
(hw usage : 2)
(hw usage : 1)
(hw usage : 2)
(hw usage : 1)
(hw usage : 2)
(hw usage : 1)
(hw usage : 2)
(hw usage : 1)
(hw usage : 3)
(hw usage : 1)
(hw usage : 1)
ACL ID Filter Count
103 0
101 0
101 0
329114195612139520
Power supply 1 with 410000 mwatts
37533986897781760 0
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01