Brocade Communications Systems FastIron SX 800 Diagnostic Manual page 77

debug ip ospf lsa-id
Syntax: [no] debug ip ospf lsa-id
This command generates information about OSPF LSA IDs as shown in the following example.
Brocade# debug ip ospf lsa-id
Debug message destination:
IP Routing:
Brocade(config-ospf-router)# Debug: Jan
AdvRtr:10.2.2.2 Age:1 LsId:10.2.2.2 Seq-Num 8000000e from Neighbor 10.9.9.2
Debug: Jan
8000000e area-id 0
Debug: Jan
Debug: Jan
Debug: Jan
seq 8000000e
Debug: Jan
= 1
Debug: Jan
Debug: Jan
area = 0
Debug: Jan
Seq-Num 8000000f from Neighbor 10.9.9.2
Debug: Jan
8000000f area-id 0
Debug: Jan
Debug: Jan
Debug: Jan
seq 8000000f
Debug: Jan
= 1
Debug: Jan
Debug: Jan
area = 0
NOTE
The debug ip ospf ls-id command must be enabled with debug ip ospf flood or debug ip ospf
lsa-generation command.
debug ip ospf max-metric
Syntax: [no] debug ip ospf max-metric
This command displays information about a max-metric configuration.
Brocade# debug ip ospf max-metric
OSPF:
Brocade(config-ospf-router)# max-metric router-lsa all-lsas
Debug: Jan 1 04:20:05 OSPF: Max-metric advertisement started due to configuration
change for vrf 0
Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
OSPF: flooding debugging is on
OSPF: lsa generation debugging is on
OSPF: ls-id 10.2.2.2 debugging is on
1 04:12:50 OSPF: install a new lsa, type 1, ls_id 10.2.2.2, age 1, seq
1 04:12:50 OSPF:
1 04:12:50 OSPF:
1 04:12:50 OSPF: NSR : Sync node add, type 1, ls_id 10.2.2.2, age 1,
1 04:12:50 OSPF: attempting to flood rcvd LSA area = 0 interface type
1 04:12:50 OSPF: flood LSA Type:1 AdvRtr:10.2.2.2 Age:1 LsId:10.2.2.2
1 04:12:50 OSPF: flood advertisement 10.2.2.2 throughout a specific
1 04:12:51 OSPF: LSA rcvd Type:1 AdvRtr:10.2.2.2 Age:1 LsId:10.2.2.2
1 04:12:51 OSPF: install a new lsa, type 1, ls_id 10.2.2.2, age 1, seq
1 04:12:51 OSPF:
1 04:12:51 OSPF:
1 04:12:51 OSPF: NSR : Sync node add, type 1, ls_id 10.2.2.2, age 1,
1 04:12:51 OSPF: attempting to flood rcvd LSA area = 0 interface type
1 04:12:51 OSPF: flood LSA Type:1 AdvRtr:10.2.2.2 Age:1 LsId:10.2.2.2
1 04:12:51 OSPF: flood advertisement 10.2.2.2 throughout a specific
max-metric debugging is on
Console
1 04:12:50 OSPF: LSA rcvd Type:1
NSR Sync ACK received for LSA
ls_header.id 10.2.2.2 type 1 ToBesyncedState 2
NSR Sync ACK received for LSA
ls_header.id 10.2.2.2 type 1 ToBesyncedState 2
OSPF debug commands
4
65