System Requirements - Sirona CEREC MC XL Premium Package Operating Instructions Manual

8 Technical description
8.1 System requirements
70
8
Technical description
8.1

System requirements

The CEREC SW / CEREC Premium SW / CEREC Premium CAM SW
software must only be installed on CEREC acquisition units or on the 64-
bit inLab PC (optional). For units up to serial number 304000, the
software status must either be CEREC SW 4.2.0 and higher or inLab SW
4.2.0 and higher. Units over serial number 304001 are only compatible
with software versions after CEREC SW 4.3 and higher or inLab SW 4.2.5
and higher.
For all software generations 4.x and higher, CEREC AC Bluecam PC
hardware version must be LN or higher (Windows 7, 64 bit). No hardware
limitations for CEREC AC / AF / AI with Omnicam.
8.2
Grinding and milling unit
8.2.1 General technical description
● Digital feed control with force monitoring for extremely sensitive
processing
● Process-controlled tool drives
● Processing repeatability:
Grinding instruments
● Step Bur 12 S
● Step Bur 12
● Cylinder Bur 12 EF
● Step Bur 20
● Cyl. Pointed Bur 12 S
● Cylinder Pointed Bur 12 EF
● Cyl. Pointed Bur 20
Milling instruments
● Shaper 25 RZ (wet milling)
● Shaper 25 (dry milling)
● Finisher 10 (wet and dry milling)
Operating Instructions CEREC MC XL Premium Package
+/- 25 μm
D 3439.201.06.10.02 10.2017
Dentsply Sirona
63 98 536 D 3439