Table of Contents
Advertisement
8 Technical description
System requirements
Working without the acquisition unit
Working with the acquisition unit
Technical description of inLab_CEREC3
Technical description of CEREC 3 burrs
48
8
Technical description
8.1
System requirements
An inLab system PC is required to run this software. The hardware version
must be PC Hardware A or higher.
If you work with the acquisition unit, it must have the hardware status PC
Hardware EA or higher.
8.2
Milling unit
Digital feed control with force monitoring for extremely sensitive
processing of ceramic materials
Process-controlled milling motors
Positioning step size:
Milling repeatability:
Milling speed:
Milling instruments (performance-monitored, backlash-free bearing)
Grain size:
Speed:
Step Bur 10
Cylinder Pointed Bur
Cylinder Bur 1.2 mm
Cylinder Bur 1.6 mm
NOTE:
You will find an overview of the old and new designations for the milling
instruments in the table in the appendix.
Sirona Dental Systems GmbH
Operating Instructions CEREC 3
12,5 μm
+/- 30 μm
approx. 0.4-0.6 mm/min
64 μm
40.000 rpm
included in the scope of
supply
included in the scope of
supply
optionally available
optionally available
58 35 595 D 3329
D 3329.201.01.20.02 02.2009
- Quick Links:
- Milling Unit
Hide quick links:
Advertisement
Table of Contents
