Technical Data; System Requirements - Sirona inEos Blue Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions Sirona Dental CAD/CAM System
Model designation
Power connection
Power consumption
Ambient conditions
Transport and
storage conditions
Protection class
Degree of protection against
ingress of water
Mode of operation
Tests/approvals
63 33 632 D3446
D3446.201.02.03.23 07.2011
4.3

Technical data

Technical data
inEos Blue
via power supply unit:
INPUT: 100-240VAC / 47- 63Hz / 1.0 A max.
permissible line voltage fluctuations:
± 10% of nominal voltage
Overvoltage category II
OUTPUT: +12VDC / 2.08A / 25W max.
15 W
For indoor use
Pollution degree 2
Temperature: 10°C – 35°C (50°F ~ 95°F)
Relative humidity: 30% – 75%
Barometric pressure: 700hPa – 1060hPa
Temperature: -40°C – +70°C (-40°F ~ 158°F)
Relative humidity: 10% – 95%
Barometric pressure: 500hPa – 1060hPa
Class I device
Ordinary equipment (not protected)
Continuous operation with intermittent loading corresponding to the
laboratory mode of working.
Tabletop unit
This device complies with the requirements of
EN 61 010-1: 2001
4.4

System requirements

System requirements
An inLab PC 64bit is required to run this software. The hardware version
must be PC Hardware L or higher.
4 Technical description
17