Technical Description; System Requirements; Milling Unit; General Technical Description - Sirona CEREC MC XL Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions CEREC MC XL Premium Package
63 98 536 D 3439
D 3439.201.06.03.02 04.2014
8

Technical description

8.1

System requirements

The CEREC SW/inLab software must only be installed on CEREC AC
MCX+PP system requirements fragment
acquisition units or inLab PC 64 bit (optional). The software version must
be either CEREC SW 4.2.0 or inLab SW 4.2.0 or higher.
The hardware version must be PC Hardware HQ with Windows 7 (64 bit)
or higher.
8.2

Milling unit

8.2.1

General technical description

● Digital feed control with force monitoring for extremely sensitive
processing of ceramic materials
● Process-controlled milling motors
● Production repeatability:
● Milling speed:
Instruments (performance-monitored, backlash-free bearing)
● Grain size:
● Speed:
● Step Bur 12 S
● Step Bur 20
● Cyl. Pointed Bur 12 S
● Cyl. Pointed Bur 20
8 Technical description
8.1 System requirements
+/- 25 μm
1.0 - 1.5 mm/min.
64 μm
42,000 rpm
65