Table of Contents
Advertisement
Dentsply Sirona
Operating Instructions CEREC MC XL Premium Package
63 98 536 D 3439
D 3439.201.06.10.02 10.2017
5.4.7.4
Connecting the suction device (optional)
5.4.7.4.1
Connecting the suction tube
1. Connect one end of the suction tube to the available connection point
on the suction device (A).
2. Connect the other end of the tube to the rear side of the milling and
grinding unit (B).
Notes on the suction tube:
The suction tube is supplied at a length of approx. 2.0 m (CEREC MC/MC
X/MC XL Premium Package). When connecting the suction device to the
unit, please ensure that no sharp bends occur over the full length of the
suction tube.
Reduce the length of the tube according to your requirements and your
installation location. Note that suction power drops along the length of the
tube. You obtain decent suction power if the suction device is placed
immediately below the machine and you have a tube length of 1.2 m or
less.
5 Installation and startup
5.4 Commissioning
25
Hide quick links:
Advertisement
Table of Contents
