Wifi Config Menu (Kdc350F) - KoamTac KDC20 User Manual

K K DC User
YOUR
Smart Hopping
It enables KDC450U to find an optimized UHF channel and can be initiated by reading a special
barcode.

WIFI Config Menu (KDC350F)

KDC350F WiFi model can send and receive data to/from host by using the following protocols.
z UDP
z
TCP
z
HTTP_GET
z HTTP_POST
In UDP/TCP mode, KDC350F will support full duplex mode, meaning is the KDC350F will be ready to
get data from host all the time.
Power
z
Turns the Wi-Fi Module Power ON and OFF.
AP
z Set AP SSID.
z Set AP Passcode.
Server
z
Configure the following server information
„
IP Address
„
URL Address
„
Port Number
„
Protocol (UDP/TCP/HTTP-GET/HTTP-POST)
„
SSL(Security)
„
Server Page
Connect
z Connect to AP and server.
Auto Connect
z
Enable/Disable KDC to reconnect to AP & Server when it detects disconnection from AP and
Server.
KDC