Table of Contents
Advertisement
2.3 How to Install/Uninstall the Smart Device into the Integrated Case (Android/iOS)
This only applies to KDC480/485 integrated charging case (SmartSled Custom Case). To install the smart
device, please follow the steps below.
a) Bend top of SmartSled Charging Case back.
b) Slide device into case toward connecter.
c)
Pull top of case over device.
d) To remove, bend top of SmartSled Charging Case back (careful not to bend smart device) and slide
device out.
2.4 How to Connect PC with KDC or Phone
This functionality only applies to KDC480/485 integrated charging case (SmartSled Custom Case).
The KDC480/485 automatically sets up a communication path with PC when you plug in USB cable to
KDC480/485 so that you can use KTSync on PC or download a new firmware into KDC from PC (KDC Path).
See Reference Manual for more detailed information.
Visit
store.koamtac.com
to purchase additional KDCs and accessories.
KDC480/485 QG
Quick Guide
QG_KDC480/485_20220630 p7
Advertisement
Table of Contents
