Synchronization Options; Application Options - KoamTac KDC100 User Manual

Synchronization Options

Synchronize KDC Time with PC Time when Connected
This option enables you to synchronize the KDC date and time with the host date and time.
Synchronization of date and time occurs after the data is uploaded to the host device.
Delays
You can set transmission delays between barcodes and characters during the synchronization process.
It is important to set proper delays to prevent errors during the transmission of collected barcodes. Some
Windows applications such as Excel require longer delay times.
Attachments
Timestamp, Barcode Type, and Serial Number can be attached to the scanned barcode by selecting these
options. The Serial Number of the KDC can be attached to the Start or End of Record.
Prefix and Suffix
Enter the characters you want appended to the front (Prefix) or back (Suffix) of the barcode in the
Prefix and Suffix fields.
The character set is any combination of ASCII characters including alphanumeric, line feed ("\n"),
and carriage return ("\r").
Order and Delimiter
Select Order of Data – Type, Data, and Timestamp
Select the Delimiter between Data – Tab, Space, Comma, and Semicolon
Select the Delimiter between Records – None, LF, CR, Tab, and <LF & CR>

Application Options

Synchronize Non-Compliant Data
The KDC will synchronize both compliant and non-compliant data (filtered data) if Synchronize Non-
Compliant Data option is Enabled.
Consolidate Steps in One Record
KTSync will consolidate the data collected in Step 1 with the data collected in Step 2 and/or Step 3. Data
will be consolidated into one record instead of individual data records for each step when Consolidate
Steps in One Record is Enabled. Non-complete records, i.e. three steps were defined but data was only
collected for two steps; would be discarded if this option is Enabled.
Attach Quantity
Quantity would be attached to the left or right of the data if this option is Enabled.
43
KDC100 User Manual