Enter Setup
Plessey
Restore Factory Defaults
Enable/Disable Plessey
Enable Plessey
Set Length Range for Plessey
The engine can be configured to only decode Plessey barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
For more information, see the j. Program the Length Range (Maximum/Mininum Lengths) for a
Symbology in Appendix 8.
Set the Minimum Length (Default: 4)
Exit Setup
**
Restore the Factory Defaults of Plessey
** Disable Plessey
Set the Maximum Length (Default: 48)
82