Plessey; Restore Factory Defaults; Enable/Disable Plessey; Set Code Id - Newland BS80 User Manual

Plessey

Restore Factory Defaults

Enable/Disable Plessey

Enable Plessey

Set Code ID

To set the Code ID, scan the Set Code ID barcode, the numeric barcodes corresponding to the
hexadecimal value of a desired ID and the Save barcode.
Example: Set the Code ID of Plessey to "p" (Hex: 0x70)
1. Scan the Set Code ID barcode.
Scan the numeric barcodes "7" and "0" from the "Digit Barcodes (1D Scanner)" section in Appendix.
2.
Scan the Save barcode from the "Save/Cancel Barcodes (1D Scanner)" section in Appendix.
3.
Restore the Factory Defaults of
Set Code ID
Plessey
Disable Plessey (default)
84