Set Length Range For Standard 25 - Newland NLS-HR20-RF User Manual

Set Length Range for Standard 25

The scanner can be configured to only decode Standard 25 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 6)
Set the Maximum Length (Default: 80)
Example: Set the scanner to decode Standard 25 barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2. Scan the numeric barcodes "0" and "8" from the "Digit Barcodes" section in Appendix.
3. Scan the Set the Maximum Length barcode.
4. Scan the numeric barcodes "0" and "C" from the "Digit Barcodes" section in Appendix.
55