Table of Contents
Advertisement
General Information
Ignition Switch Positions
This is a four-position, key operated
switch. The key can be removed from
the switch only when it is in the OFF,
LOCK or P (PARK) position.
TO LOCK: Turn the handlebar fully to the
left, turn the key to the OFF position,
push and fully release the key, then
rotate it to the LOCK position.
PARKING: Turn the key from the LOCK
position to the P position. The steering
will remain locked, and the position
lights will be switched on.
Note:
•
Do not leave the steering lock in
the P position for long periods of
time as this will cause the battery
to discharge.
Warning
For reasons of security and safety,
always move the ignition switch to the
OFF, LOCK or PARK position and remove
the key when leaving the motorcycle
unattended.
Any
unauthorized
motorcycle may cause injury to the
rider, other road users and pedestrians
and may also cause damage to the
motorcycle.
94
use
of
the
Warning
With the key in the LOCK or P position
the steering will become locked.
Never turn the key to the LOCK or P
positions
while
moving as this will cause the steering
to lock. Locked steering will cause loss
of motorcycle control and an accident.
Right Handlebar Switches
All Models except Tiger 1200 XR
7
6
5
4
3
1
ckdp
1.
HOME button
2.
Engine start/stop switch
3.
QUICK START position
4.
RUN position
5.
STOP position
6.
Power ON/OFF position
7.
Hazard warning lights switch
8.
Steering lock button
HOME Button
The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button to
select between the main menu and
instrument display.
the
motorcycle
8
2
is
Advertisement
Table of Contents
