Table of Contents
Advertisement
Wheel Bearings Inspection
Warning
Operation with worn or damaged front
or rear wheel bearings is dangerous
and may cause impaired handling and
instability leading to an accident.
If in doubt, have the motorcycle
inspected by an authorized Triumph
dealer before riding.
Note:
•
If the wheel bearings in the front or
rear wheel allow play in the wheel
hub, are noisy, or if the wheel does
not
turn
smoothly,
authorized Triumph dealer inspect
the wheel bearings.
The wheel bearings must be inspected
at
the
intervals
scheduled maintenance chart.
To inspect the wheel bearings:
• Position the motorcycle on level
ground, in an upright position.
• Raise the front wheel above the
ground and support the motorcycle.
• Standing
at
motorcycle, gently rock the top of
the front wheel from side to side.
• If any free play can be detected,
ask your authorized Triumph dealer
to inspect and rectify any faults
before riding.
• Reposition the lifting device and
repeat the procedure for the rear
wheel.
• Remove the support and place the
motorcycle on the side stand.
have
your
specified
in
the
the
side
of
the
Front Suspension
Front Fork Inspection
Warning
Riding the motorcycle with defective or
damaged suspension is dangerous and
may lead to loss of motorcycle control
and an accident.
Warning
Never attempt to dismantle any part of
the suspension units, as all units
contain pressurized oil.
Skin and eye damage can result from
contact with the pressurized oil.
Examine each fork for any sign of
damage,
scratching
surface, or for oil leaks.
If any damage or leakage is found,
consult an authorized Triumph dealer.
To
check
that
smoothly:
• Position the motorcycle on level
ground.
• While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
• If roughness or excessive stiffness
is detected, consult your authorized
Triumph dealer.
Maintenance
of
the
slider
the
forks
operate
183
Advertisement
Table of Contents
