Table of Contents
Advertisement
Warning
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured, it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Rider's Seat
Warning
The rider's seat is only correctly
retained and supported once the
passenger seat is correctly mounted.
Never ride the motorcycle with the
passenger seat detached or removed,
as the front seat will not be secured
and may move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
1.
Rider's seat
To remove the rider's seat:
• Remove the passenger seat (see
• Grasp the rider's seat on either
• If equipped with heated seats,
To re-install the seat:
• Reconnect
• Engage the seat's front rail into the
• Push down firmly on the rear of the
• Reinstall the passenger seat (see
Rider's Seat Height Adjustment
Always
adjusters.
1
Adjusting only one height adjuster may
prevent correct installation of the seat.
Riding
incorrectly mounted seat may cause
loss of motorcycle control and an
accident.
General Information
page 122).
side, and slide it rearwards and
upwards.
disconnect
the
electrical connector for complete
removal from the motorcycle.
the
electrical connector (if equipped).
bracket at the rear of the fuel tank
and lower the rear rail into the rear
brackets.
seat.
page 122).
Warning
adjust
both
the
motorcycle
heated
seat's
heated
seat's
seat
height
with
an
123
Advertisement
Table of Contents
