Table of Contents
Advertisement
Warning
If the optimized cornering ABS is not
functioning, the ABS warning light will
illuminate
and
SYSTEM - CORNERING ABS DISABLED
will be displayed in the multifunction
display.
In this situation, the ABS will continue
to operate but without the optimized
cornering function, provided that:
• There are no other ABS faults
• The ABS has not been disabled by the
rider (see Bike Setup on page 76 or
Riding Mode Configuration on page 85).
Do not continue to ride for longer than
is necessary with the warning light
illuminated. In the event of a fault,
contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
In this situation, braking too hard
during cornering may result in loss of
motorcycle control and an accident.
the
message
ABS
How to Ride the Motorcycle
ABS Warning Light
When the ignition switch is
turned to the ON position, it is normal
for the ABS warning light to flash on
and off.
If the ABS warning light is constantly
illuminated it indicates that the ABS
function is not available because:
• the ABS has been disabled by the
rider (see Bike Setup on page 76 or
Riding
page 85).
• the ABS has a malfunction that
requires investigation.
If the ABS warning light becomes
illuminated while riding, it indicates that
the ABS has a malfunction that requires
investigation.
warning messages may be displayed in
the multifunction display:
• WARNING - ABS SYSTEM DISABLED
• ABS SYSTEM - CORNERING ABS
DISABLED (models equipped with
optimized cornering ABS only).
For more information on the ABS
warning light, see page 61.
Mode
Configuration
One
of
the
on
following
151
Advertisement
Table of Contents
