Table of Contents
Advertisement
General Information
Pressing and holding the MODE button
will provide direct access to a Riding
Mode's Configuration Menu (see Riding
Mode Configuration on page 85).
Throttle Control
3
2
1
1.
Throttle open position
2.
Throttle closed position
3.
Cruise control cancel position
This Triumph model has an electronic
throttle twist grip to open and close the
throttle via the engine control unit.
There are no direct-acting cables in the
system.
The throttle grip has a resistive feel to it
as it is rolled rearwards to open the
throttle. When the grip is released it will
return to the throttle closed position by
its internal return spring and the
throttle will close.
From the closed position, the throttle
twist
grip
can
0.12 - 0.16 in (3 - 4 mm) to deactivate the
cruise control (see page 106).
There are no user adjustments for the
throttle control.
102
be
rolled
forward
If there is a malfunction with the
throttle
control
Indicator
Light
illuminated and one of the following
engine conditions may occur:
• MIL illuminated, restricted engine
RPM and throttle movement
• MIL illuminated, limp-home mode
with the engine at a fast idle
condition only
• MIL illuminated, engine will not
start.
For all of the above conditions contact
an authorized Triumph dealer as soon
as possible to have the fault checked
and rectified.
Brake Use
Warning
Reduce speed and do not continue to
ride for longer than is necessary with
the
malfunction
illuminated. The fault may adversely
affect engine performance, exhaust
emissions and fuel consumption.
Reduced engine performance could
cause a dangerous riding condition,
leading to loss of motorcycle control
and an accident.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
At low throttle opening (approximately
68°F (20°C)), the brakes and throttle can
be used together.
the
Malfunction
(MIL)
becomes
indicator
light
Advertisement
Table of Contents
