Table of Contents
Advertisement
Left Handlebar Switches
All Models except Tiger 1200 XR
9
10
8
7
6
ckdf
1.
Cruise control adjust switch
2.
Daytime Running Lights (DRL) switch
(if equipped)
3.
MODE button
4.
Turn signal switch
5.
Joystick button
6.
Horn button
7.
Heated grips switch
8.
Front fog lights switch (if equipped)
9.
High beam button
10.
Rider's heated seat switch (if equipped)
Cruise Control Adjust Button
The cruise control adjust button is a
two way switch with the top marked
RES/+ and the bottom marked SET/-.
For more information on cruise control
operation, see page 104.
Daytime Running Lights (DRL)
Switch (if equipped)
1
ON and the daytime running lights
switch is set to DRL mode, the daytime
running
2
illuminate.
3
The daytime running lights and low
beam headlights are operated manually
4
using the DRL switch. Press the top of
the switch for DRL mode, and the
5
bottom of the switch for low beam
headlight mode.
Do not ride for longer than necessary
in poor ambient light conditions with
the Daytime Running Lights (DRL) in
use.
Riding with the daytime running lights
when dark, in tunnels or where poor
ambient light is apparent may reduce
the riders vision or blind other road
users.
Blinding other road users or reduced
vision in low ambient light levels may
result in loss of motorcycle control and
an accident.
Note:
•
During daylight hours the daytime
running lights improve the motor-
cycles visibility to other road users.
•
Low beam headlights must be used
in any other conditions unless the
road conditions allow for high beam
headlights to be used.
General Information
When the ignition is switched
lights
warning
Warning
light
will
97
Advertisement
Table of Contents
