Table of Contents
Advertisement
Warning Lights
Note:
•
When the ignition is switched on,
the instrument warning lights will
illuminate for 1.5 seconds and will
then go off (except those which
remain on until the engine starts,
as described in the following pages).
Engine Management System
Malfunction Indicator Light (MIL)
The Malfunction Indicator Light
(MIL)
for
the
system illuminates when the ignition is
switched ON (to indicate that it is
working)
but
should
illuminated when the engine is running.
If the MIL becomes illuminated when the
engine is running, this indicates that a
fault has occurred in one or more of the
systems
controlled
management
system.
circumstances, the engine management
system will switch to 'limp-home' mode
so that the journey may be completed, if
the fault is not so severe that the
engine will not run.
engine
management
not
become
by
the
engine
In
Reduce speed and do not continue to
ride for longer than is necessary with
the MIL illuminated. The fault may
adversely affect engine performance,
exhaust
consumption.
Reduced engine performance could
cause a dangerous riding condition,
leading to loss of control and an
accident.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
Note:
•
If the MIL flashes when the ignition
is
authorized Triumph dealer as soon
as possible to have the situation
rectified. In these circumstances
the engine will not start.
such
Low Oil Pressure Warning Light
With the engine running, if the
engine
dangerously low, the low oil pressure
warning light in the tachometer will
illuminate
PRESSURE LOW will be displayed in the
multifunction display screen.
Instruments
Warning
emissions
switched
ON
oil
pressure
and
WARNING
and
fuel
contact
an
becomes
-
OIL
59
Advertisement
Table of Contents
