Table of Contents
Advertisement
Engine Management System
Malfunction Indicator Light (MIL)
The Malfunction Indicator Light
(MIL)
for
the
system illuminates when the ignition is
switched ON (to indicate that it is
working)
but
should
illuminated when the engine is running.
If the MIL becomes illuminated when the
engine is running, this indicates that a
fault has occurred in one or more of the
systems
controlled
management
system.
circumstances, the engine management
system will switch to 'limp-home' mode
so that the journey may be completed, if
the fault is not so severe that the
engine will not run.
Warning
Reduce speed and do not continue to
ride for longer than is necessary with
the MIL illuminated. The fault may
adversely affect engine performance,
exhaust
emissions
consumption.
Reduced engine performance could
cause a dangerous riding condition,
leading to loss of control and an
accident.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
engine
management
not
become
by
the
engine
In
and
Note:
•
If the MIL flashes when the ignition
is
authorized Triumph dealer as soon
as possible to have the situation
rectified. In these circumstances
the engine will not start.
Low Oil Pressure Warning Light
With the engine running, if the
engine
such
dangerously low, the low oil pressure
warning light will illuminate.
Stop the engine immediately if the low
oil pressure warning light illuminates.
Do not restart the engine until the
fault has been rectified.
Severe engine damage will result from
running the engine when the low oil
pressure warning light is illuminated.
fuel
Note:
•
The low oil pressure warning light
will illuminate if the ignition is
switched ON without running the
engine.
Immobilizer/Alarm Indicator Light
This Triumph motorcycle is equipped
with an engine immobilizer which is
activated when the ignition is switched
off.
Instruments
switched
ON
oil
pressure
Caution
contact
an
becomes
25
Advertisement
Table of Contents
