Table of Contents
Advertisement
Headlight Adjustment
Tiger 1200 XR Only
The headlights can be adjusted by
means
of
vertical
adjustment screws located on the rear
of each headlight. In addition, the
headlight unit is equipped with an easily
accessible adjuster to allow the vertical
adjustment to be corrected when the
motorcycle is fully loaded.
3
2
1.
Horizontal adjustment screw
2.
Vertical adjustment screw
3.
Headlight adjuster lever for loaded
conditions
To adjust the headlight:
• Switch the headlight dipped beam
on.
• Turn the vertical adjustment screw
on the headlight clockwise to raise
the beam or counterclockwise to
lower the beam.
• Turn the horizontal adjustment
screw clockwise to move the beam
to the right or counterclockwise to
move the beam to the left.
• Switch the headlights off when the
beam settings are satisfactory.
and
horizontal
1
Headlight Adjustment Lever for
Loaded Conditions
1
1.
Headlight
adjuster
position)
2.
Headlight
adjuster
position)
For normal (unloaded) conditions the
headlight adjuster lever should be set in
the horizontal position (1).
For
loaded
conditions
headlight adjuster downwards until it
stops (2). This will lower the headlight
beams by approximately 2°.
Maintenance
2
lever
(unloaded
lever
(loaded
rotate
the
203
Advertisement
Table of Contents
