Table of Contents
Advertisement
Exit
Select EXIT to return to the SETTINGS
menu.
Anti-Lock Braking System (ABS)
It is possible to temporarily disable the
ABS system. The ABS system cannot be
permanently
disabled,
automatically enabled when the ignition
is turned OFF and then ON again.
Warning
Selecting ABS DISABLE will disable the
anti-lock braking system.
The ABS settings stored for each riding
mode will be overridden, regardless of
whether they are set to Road, Off-
Road or OFF.
The ABS and the riding mode ABS
settings will not be enabled again until
ENABLE is selected from the ABS menu
or the ignition is turned OFF then ON
again.
If the ABS is disabled, the brake system
will function as a non-ABS braking
system. In this situation braking too
hard will cause the wheels to lock, and
may result in loss of motorcycle control
and an accident.
Warning
Do not attempt to adjust the ABS
settings while the motorcycle is in
motion as this may lead to loss of
motorcycle control and an accident.
To enable or disable the ABS system:
it
will
be
Note:
Traction Control (TC)
It is possible to temporarily disable the
Traction Control (TC) system. The TC
system cannot be permanently disabled,
it will be automatically enabled when the
ignition is turned OFF and then ON
again.
• Press the SCROLL button to select
ABS, then press the SELECT button
to confirm.
• Press the SCROLL button to select
ENABLE or DISABLE.
ABS
ENABLE
ABS (ENABLE Shown)
• Press the SELECT button to confirm
the selection and return to the
BIKE SETUP menu.
• If DISABLE is selected, the ABS
warning light will be illuminated and
the
message
SYSTEM DISABLED will be briefly
shown in the multifunction display
screen.
• The ABS and all riding mode ABS
settings will be disabled until the
ABS is re-enabled. All ABS settings
are automatically enabled when the
ignition is turned OFF and then ON
again.
•
If the ABS is disabled by the rider,
traction control and cruise control
(if equipped) will still function.
Instruments
WARNING
-
ABS
77
Advertisement
Table of Contents
