General Information
Ignition Key
1
Steering lock
2
Off position
3
On position
4
Lock position
5
Park position
In addition to operating the steering
lock/ignition switch, the ignition key is
required to operate the seat lock and
fuel tank cap.
When the motorcycle is delivered
from the factory, two keys are
supplied together with a small tag
bearing the key number.
note of the key number and store the
spare key and key number tag in a
safe place away from the motorcycle.
Your authorised Triumph dealer can
supply a replacement key cut from
details of the key number or can cut a
new key using the original as a
master.
24
Do not store the spare key with the
motorcycle as this will reduce all
aspects of security.
Ignition Switch/Steering
Lock
Ignition Switch Positions
This is a four position, key operated
switch.
from the switch only when it is in the
OFF, LOCK or P (PARK) position.
TO LOCK: Turn the key to the 'OFF'
position, push and fully release the
key, then rotate it to the 'LOCK'
position.
'PARKING' : Turn the key from the
'LOCK' position to the `P' position.
The steering will remain locked.
NOTE
•
Make a
www.ClassicCycles.org
Caution
The key can be removed
Do not leave the steering lock
in the 'P' position for long
periods of time as this will
cause
the
discharge.
battery
to