Always get replacement keys from your
authorized Triumph dealer. Replacement
keys
must
be
'paired'
motorcycle's
immobilizer
authorized Triumph dealer.
Caution
Do not store the spare key with the
motorcycle as this will reduce all
aspects of security.
Engine Immobilizer
The ignition barrel housing acts as the
antenna for the engine immobilizer.
When the ignition switch is turned to
the OFF position and the ignition key is
removed, the engine immobilizer is active
(see page 29). The engine immobilizer is
deactivated when the ignition key is in
the ignition switch and it is turned to
the ON position.
General Information
Ignition Switch/Steering Lock
with
the
by
your
2
P
5
1.
Ignition switch/steering lock
2. LOCK position
3. OFF position
4. ON position
5. PARK position
Ignition Switch Positions
This is a four position, key operated
switch. The key can be removed from
the switch only when it is in the OFF,
LOCK or P (PARK) position.
TO LOCK: Turn the handlebar fully to the
left, turn the key to the OFF position,
push and fully release the key, then
rotate it to the LOCK position.
PARKING: Turn the key from the LOCK
position to the P position. The steering
will remain locked, and the position lights
will be switched on.
Note:
•
Do not leave the steering lock in the
P position for long periods of time as
this will cause the battery to
discharge.
3
4
1
59