Table of Contents
Advertisement
Brakes
Check that the front and rear brakes
are functioning properly.
Tires
High speed operation is hard on tires,
and tires that are in good condition are
crucial to riding safely. Examine their
overall condition, inflate to the correct
pressure (when the tires are cold), and
check the wheel balance. Securely install
the valve caps after checking tire
pressures.
Observe
given
in
the
Specification sections on tire checking
and tire safety.
Fuel
Have sufficient fuel for the increased
fuel consumption that will result from
high-speed operation.
Caution
The exhaust system is equipped with a
catalytic converter to help reduce
exhaust emission levels.
The
catalytic
permanently damaged if the motorcycle
is allowed to run out of fuel or if the fuel
level is allowed to get very low.
Always make sure that you have
adequate fuel for your journey.
the
information
Maintenance
converter
can
How to Ride the Motorcycle
Engine Oil
Make sure that the engine oil level is
correct. Make sure that the correct
grade and type of oil is used when
topping off.
Final Drive Oil
Make sure that the final drive oil level is
correct. Make sure that the correct
grade and type of oil is used when
topping off.
Coolant
and
Check that the coolant level is at the
upper level line in the expansion tank.
(Always check the level with the engine
cold.)
Electrical Equipment
Make sure that the headlight, rear/
brake light, turn signals, horn, etc. all
work properly.
Miscellaneous
Visually check that all fasteners are
tight.
be
157
Advertisement
Table of Contents
