Seats; Seat Care; Rider's Seat - Triumph Street Triple S 2022 Owner's Handbook Manual

Seats

Seat Care

Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
See page 194
information.
for seat cleaning
GENERAL INFORMATION

Rider's Seat

cjxd
1. Rider's seat fastener
To remove the rider's seat:
▼ Remove the passenger seat or seat
cowl (see page 112).
▼ Remove the fastener located to the
rear of the padding. This will allow
the rider's seat to slide up and
rearwards for complete removal from
the motorcycle.
To re-install the seat:
▼ Engage the seat's tongue under the
fuel tank.
▼ Install and tighten the fastener to
80 lbf in (9 Nm).
▼ Re-install the passenger seat or seat
cowl (see page 112).
Warning
The rider's seat is only correctly
retained and supported once the
fastener is correctly tightened.
Never ride the motorcycle with the
fastener loose or removed, as the
rider's seat will not be secure and may
move.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
111
1