Rider's Seat - Triumph Tiger 850 Sport Owner's Handbook Manual

GENERAL INFORMATION
98
Passenger Seat Installation
1
2
1. Passenger seat brackets
2. Locating feature
3. Rider's seat mountings
To install the passenger seat:
▼ Reconnect
electrical connector (if equipped).
▼ Push down firmly on the rear of the
rider seat and hold.
▼ Engage the seat's two brackets into
the locating feature.
▼ Press down at the rear to engage in
the seat lock.
2
3
the heated seat's

Rider's Seat

The rider's seat is only correctly
retained and supported once the
passenger seat is correctly installed.
1
Never ride the motorcycle with the
passenger seat detached or removed,
as the rider's seat will not be secure
and may move.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
Rider's Seat Removal
1. Rider's seat
To remove the rider's seat:
▼ Remove the passenger seat (see
page 97).
▼ Grasp the rider's seat on either side,
and slide it rearwards and upwards.
▼ If equipped
disconnect
electrical connector for complete
removal from the motorcycle.
Warning
1
with heated seats,
the heated seat's