Dräger Babylog 8000 plus Operating Instructions Manual page 4

Working with these Operating Instructions
Working with these Operating Instructions
Header line – the title...
of the main chapter
The title of the respective sub-section is printed
underneath the main header – to help you find your way
quickly from subject to subject.
Page body...
the Operating Instructions
combine text and illustrations. The information is
presented in the form of required steps of action, giving
the user hands-on experience in learning how to use the
ventilator.
Left-hand column...
the text
provides explanations and instructs users step-by-step in
the practical use of the product, with short, clear
instructions in easy to follow sequences.
Bullet points indicate separate actions. Where several
actions are described, numbers are used to refer both to
relevant details in the illustrations and to specify the
sequence of actions.
Right-hand column...
the illustrations
provide the visual reference for the text and make it easier
to locate the various parts of the device. Elements
mentioned in the text are highlighted. Unnecessary details
are omitted.
Rendering of screen displays guide the user and allow to
reconfirm actions performed.
Typing conventions...
Controls are designated as »Control Name« , e.g:
»PEEP/CPAP«
Screen messages are printed in bold, e.g:
Calibrate flow sensor!
4
Calibrating the O2-Sensor Manually
After sensor has been replaced, but possible at all
times.
1 Press »Cal Config.« menu key.
2 Press »O2-Cal« menu key.
3 After about 5 minutes, O2-Cal disappears from
the display, calibration is now completed.
The respective text message may now be cleared:
1 Press »Confirm« key.
WARNING !
Strictly follow this Operator's Instruction Manual
Any use of the product requires full under-
standing and strict observation of all portions of
these instructions. The equipment is only to be
used for the purpose specified under "Intended
Use" (see page 18) and in conjunction with
appropriate airway monitoring (see page 19).
Observe all WARNINGS and CAUTIONS as
rendered throughout this manual and on labels
on the equipment.
Preparation
Calibrations
1
D Babylog 8000 plus
2
3
1
D Babylog 8000 plus